For sales or technical support call us at 978-499-0049 or toll free at 877-667-8383
Please select a category to view the component parts for the C3750 Workstation
Part | Description |
---|---|
5182-1857 | Audio cable assembly - For CD-ROM, CD-RW, or DVD-ROM - 4-pin (F) connector to 4-pin (F) connector - 47.8cm (18.8in) long - From CD-ROM drive to system processor board |
A4986-63005 | Drive power cable - Two 4-pin (F) connectors with four wires and a 4-pin (F) connector with two wires - 85cm (33.5in) long - From CD-ROM and floppy drives to system processor board |
A4986-63004 | Floppy drive ribbon cable with ferrite - 34-pin (F) connector marked 'to PCA' to 34-pin (F) connector marked 'to floppy' - 43.2cm (17in) long |
A4986-63002 | IDE CD-ROM drive ribbon cable with ferrite - 40-pin (F) connector marked 'to PCA' to a 40-pin (F) connector marked 'to CD-ROM' - 34cm (13.4in) long - From CD-ROM drive to system processor board |
A4986-63006 | Ribbon cable - DB-25 (M) connector to 20-pin (F) connector - 46cm (18in) long - From LCD display to system processor board |
A4986-63003 | Ultra SCSI/Low Voltage Differential (LVD) SCSI cable - Has one 68-pin (M) connector on each end - 0.6m (2ft) long - From SCA hard drive backplane board to system processor board |
Part | Description |
---|---|
A5009A | 1.44MB floppy drive - 3.5-inch form factor with IDE PC/AT interface |
D2035-60282 | 1.44MB, 3.5-inch floppy drive (Flint Gray) - 1/3 height |
A1658-69031 | 18GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) |
A4998A | 18GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
A5001A | 32x-max CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector |
A7208A | 36.4GB Ultra2 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
A7208-69001 | 36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
A6031A | 36GB Ultra2 Wide LVD SCSI hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
A7207-69001 | 73GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
A7207A | 73GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
D4388-69018 | ATAPI IDE DVD-ROM drive - 16x-max DVD-ROM read, 40x-max CD-ROM read - Half height drive |
405781-001 | ATAPI IDE DVD-ROM drive - 16x-max DVD-ROM read, 48x-max CD-ROM read - Half height drive with Carbon Black faceplate |
A4978-62006 | CD-ROM drive mounting bracket |
A4986-62006 | Floppy disk drive mounting bracket - Mounts below the CD-ROM drive |
D4389-60091 | IDE CD-ROM drive - 48X CD-ROM read (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control |
D4398-69091 | IDE CD-RW drive (Mitsumi CR-4809TE) - 24X-max CD-R write, 10X-max CD-RW write, 40X-max CD-ROM read |
A7853A | IDE CD-RW drive - 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read |
A4986-86003 | SCA (Single connector attach) hard disk backplane PCA - Has one female 68-PIN connector, and two 80-PIN SCA hard drive connectors - Mounts to the rear of the hard drive bay |
A4978-62005 | Single Connector Attach (SCA) hard disk drive mounting bracket - Allows mounting of removable hard drives in the drive bay |
Part | Description |
---|---|
A9365-62001 | Chassis assembly - Includes: 2 rear fans, hard drive/memory fan, I/O card fan, I/O card guide with speaker, I/O card bracket, air divider, IDE, FDD, and SCSI LVD power and data cables, status panel with cable, drive trays, and the front bezel assembly |
Part | Description |
---|---|
A4986-68501 | Tubeaxial fan (Panaflo FBA08T12H) - 80mm x 80mm x15mm fan with three wire cable - 12VDC nominal operating voltage - For memory and hard drive cooling - Mounts on the side of the hard drive bay |
A4978-62012 | Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable - 12VDC nominal operating voltage - Mounts to the I/O card cage bracket |
A4978-86014 | Tubeaxial fan kit (Panaflo model FBA12G12H) - 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable - 12VDC nominal operating voltage - Includes ESD wrist strap and instructions - Mounts on the rear of the chassis assembly (Two used) |
Part | Description |
---|---|
A7789-69510 | HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system |
A7789A | HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system |
A1262A | HP VISUALIZE-FX5 Pro PCI graphics card - 64MB SDRAM memory |
A1299B | HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory |
A4982-69502 | HP VISUALIZE-fxe (rev B) PCI graphics board - 9.5MB of texture memory (24MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982B) |
A4982-69001 | HP VISUALIZE-fxe PCI graphics board - 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982A) |
A4982B | HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz |
A1262-69001 | VISUALIZE-FX5 Pro PCI graphics card - 64MB SDRAM memory |
A1299-69003 | VISUALIZE-fx10b Pro PCI graphics board - 128MB DDR SDRAM memory |
Part | Description |
---|---|
B5509-66001 | 100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot |
B5509BA | 100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot |
A5158A | 1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors |
A5158AR | 1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors |
J3525A | 2 Port X.25/Frame Relay adapter card for HP-UX |
A6795A | 2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
A6795AR | 2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
A4926A | LAN adapter - 1000Base-SX PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
A4929A | LAN adapter - 1000Base-T PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
J3526A | WAN adapter - Four port X.25 frame relay adapter card |
Part | Description |
---|---|
A6016A | 1024MB, 120MHz SDRAM DIMM memory module |
A3864-69001 | 1024MB, 120MHz SDRAM DIMM memory module - (Part of A6016A) |
A4993A | 128MB, 120MHz SDRAM DIMM memory module |
A3860-69001 | 128MB, 120MHz SDRAM DIMM memory module - (Part of A4993A) |
A4994A | 256MB, 120MHz SDRAM DIMM memory module |
A3862-69001 | 256MB, 120MHz SDRAM DIMM memory module - (Part of A4994A) |
A4995A | 512MB, 120MHz SDRAM DIMM memory module |
A3863-69001 | 512MB, 120MHz SDRAM DIMM memory module - (Part of A4995A) |
Part | Description |
---|---|
A4978-62025 | LCD display with power switch mounted in a plastic bracket - Has attached 1-inch ribbon cable with male DB-25 connector - Mounts to the front of the chassis assembly |
Part | Description |
---|---|
A9365-60015 | System processor board assembly - Includes one 875MHz PA-RISC 8700+ processor |
A9365-60510 | System processor board assembly - Includes one 875MHz PA-RISC 8700+ processor |
A9365-69015 | System processor board assembly - Includes one 875MHz PA-RISC 8700+ processor |
Part | Description |
---|---|
A9365-04040 | DIMM Memory retainer bracket - Holds the DIMM modules in the system processor board |
A4986-00039 | Fan mounting bracket for 80mm hard disk / memory cooling fan |
A4986-40005 | Fan/speaker bracket assembly - Has PC board guides on rear for the I/O boards |
A9365-84010 | Front bezel assembly - Includes front bezel with molded in display bezel and power button, blank CD-ROM and floppy filler panels, and security lock |
A4986-00026 | I/O card air divider (baffle) - Mounts in the upper rear of the chassis assembly (above the two rear panel fans) |
A4986-40007 | PCI board retainer clip - Keeps the PCI boards secure in the system board connector slots |
5063-4513 | Speaker - 7.62cm (3.0in) diameter, 8-ohm impedance, 1.5-watt - Has attached 45.7cm (18in) long cable with 2-pin connector - Mounts in the I/O fan and speaker bracket assembly |
Part | Description |
---|---|
A4986-69001 | Power supply assembly (500 watts) - Includes power supply, safety interlock switch, and AC power connector - Mounts in the lower left of the chassis assembly |
Part | Description |
---|---|
A4986-63008 | LVD (Low voltage differential)/single-ended SCSI terminator - Has integral status LED which displays single-ended or low voltage differential mode - 68 pin (M) with thumbscrews |
A1658-63012 | NSE (Narrow single-ended) external passive SCSI terminator module - 50 pin (M) with latch/spring clips |
Cage Code 3EWZ2
NAICS Codes
On Queue Computer, Inc.
18 Graf Rd. Unit 20
Newburyport, MA 01950
Phone: (978)499-0049
Toll Free: (877) 667-8383
Fax: (978) 499-0031
sales@on-queue.com
Copyright © 2001-2024 On Queue Computer, Inc.