HP Integrity RX2800 i2 Server
Microprocessor architecture
- Processors
- Processor cores: 2-8
- Processor modules: 1-2
- One or Two 64 bit Intel Itanium processor: Either dual core 1.6 GHz/10 MB on-chip L3 cache 9310 processor, or quad core 1.33 GHz/16 MB on-chip L3 cache 9320 processor, or quad core 1.60 GHz/20 MB onchip L3 cache 9340
- Dual-core series 9300 Itanium Processors
- Dual-core 1.6-GHz with 10.0-MB Level 3 Cache 9310 processor
- Quad core series 9300 Itanium processor
- Quad core 1.33 GHz with 16 MB Level 3 Cache 9320 processor
- Quad core 1.60 GHz with 20 MB Level 3 Cache 9340 processor
- All Processors Support
- Level 2 Cache: 512KB Instruction/256 KB Data per core
- Level 1 Cache: 32 KB per core; 16KB (I)/16KB (D)
- Single bit cache error correction
- 50 bit physical addressing
- 64 bit virtual addressing
- 4 GB maximum page size
- Error protection on all major data structures
- Intel Hyper Threading
- Intel Advanced Thermal Management (Foxton/VFM)
- Intel Cache Safe Technology
Main memory
- Minimum Memory: 4GB (2 x 2GB)
- Maximum Memory: 384GB (24 x 16GB)
- Up to four 6-slot memory riser boards (base server comes with one 6-slot memory riser board - 6 DIMM slots)
- Memory is installed in groups of two DIMMS
- Best performance is achieved by installing all of the same size DIMMs
- PC3 10600 Registered CAS9 memory modules
Operating systems
- HP-UX 11i v3 HWE 1009 or later
- HP OpenVMS v8.4 with VMS84I_UPDATE-V0500, rx2800 i2 enablement kit
- Windows Server 2008 Itanium Edition R2
Internal storage devices
- Internal Disk Drives - 8 maximum
- Disk products: Serial Attached SCSI small form factor (SFF) Hot Plug Dives
72GB 15K, 146GB 15K, 300GB 10K, 300GB 15K, 450GB 10K, 600GB 10K, 900GB 10K, 1200GB 10K - Disk products: 6G SAS Hot Plug Enterprise Performance Solid State Drives
200GB, 400GB - Maximum storage: 7.2 TB
- Removable media: 1 open bay for Slimline DVD-ROM or DVD+RW
- HP p410i SAS RAID Controller integrated on system board. Supports internal RAID 0, 1, 5, and 6. Optional 512MB Cache/ Super Capacitor kit (AM252A) for RAID 0 and RAID 1; AM252A is required for RAID 5 and RAID 6.
Expansion slots
- Two I/O Riser Boards
- Choice of:
- PCIe 3-Slot Riser Board with one full-length/full-height x8 speed/x16 connector slot and two half length/full-height x4 speed/x8 connector slots
- PCIe 2-Slot Riser Board with one full-length/full-height x8 speed/x16 connector slot and one half length/full-height x8 speed/x16 connector slots
Core I/O and management processor interconnect
- Two 2-port Intel 82575 10/100/1000BaseTX LAN chips with RJ 45 connector-Supports LAN boot for operating system installation and wake on LAN capability
- HP 410i 6Gb SAS RAID Controller, supports up to 8 internal SAS disk drives
- Four USB 2.0 style A ports (USB 1.1 compatible); two front port, two rear ports
- One general purpose serial port on rear of system
- Telnet and web console via 10/100/1000Base-TX management LAN (RJ 45 connector)
- Two VGA ports; one front, one rear
Environmental Specifications
- Altitude Operating: 3000m (10,000ft) maximum
- Non-operating: 4500m (15,000 ft) maximum
- Temperature (Celsius and Fahrenheit)
- Operating: 5°C - 35°C (41°F - 95°F) up to 1500m (4900ft)
- Non-operating: -40°C - 80°C (-40°F - 175°F)
- Maximum rate of temperature change: 20° C/hour
- Humidity
- Operating: 20% RH - 80% RH, 21°C (70°F) maximum dew point; non-condensing
- Non-operating: 8% RH - 90% RH, 29°C (84°F) maximum dew point; non-condensing
Physical dimensions
- Rack form factor
- Height: 2U/ 3.5 in (89 mm)
- Width: 19 in (482 mm)
- Depth: 27.25 in (692 mm)
- Weight: 66 lbs (30 kg)
Power Supply
- AC Input Specifications
- 1 Power Supply Standard; 2nd available for N+N redundancy
- 100-120 VAC 50/60 Hz
- 200-240 VAC 50/60 Hz
- 9.3 Amps max @ 100 VAC
- 6.6 Amps max @ 200 VAC
- 1075W rated input power @ 108 VAC
- 1375W rated input power @ 180 VAC
- Maximum output: 800W maximum @ 100 - 120 VAC; 1200W maximum @ 200 - 240 VAC
- DC Input Specifications
- -36 VDC to -72 VDC ( -48 VDC nominal)
- <40A max @ -36 VDC
- Hot swap Power supplies: 2 included, 2nd for N+N
- Redundant DC power inputs: 2 included, 2nd for N+N
- BTU Rating Maximum: 4800 BTU/hr
- Power Supply Output: 1200W maximum