| Bill of Materials |
|
Cables
|
A4978-63004 Ribbon Cable - Data cable for the DDS-3 tape (or floppy) drive and the CD-ROM drive |
Cables
|
A4978-63005 Drive power cable assembly - Connects from the I/O and PCI backplane PC board assembly to the SCA hard drive interface board, floppy/tape drive bay, and the CD-ROM bay |
Cables
|
A4978-63009 Ribbon Cable - Connects between the system processor board and the front panel (For the LCD display and power switch assembly) |
Cables
|
A4978-86005 New part for A4978-89005 |
Cables
|
A4978-89005 Flex cable assembly (U-shaped) - From system processor PC board to I/O and PCI backplane board |
Drives
|
0950-3694 New part for A1658-69032 |
Drives
|
A1658-60027 New part for A1658-69027 |
Drives
|
A1658-60031 New part for A1658-69031 |
Drives
|
A1658-69027 9.1GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC) |
Drives
|
A1658-69031 18GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) |
Drives
|
A1658-69032 36.4GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) |
Drives
|
A4997A 9.1GB Ultra2 wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
Drives
|
A4998A 18GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
Drives
|
A5001A 32x-max CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector |
Drives
|
A5009A 1.44MB floppy drive - 3.5-inch form factor with IDE PC/AT interface |
Drives
|
A6031A 36GB Ultra2 Wide LVD SCSI hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
Drives
|
A7207-67001 New part for A7207-69001 |
Drives
|
A7207-69001 73GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
Drives
|
A7207A 73GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
Drives
|
A7208-67001 New part for A7208-69001 |
Drives
|
A7208-69001 36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
Drives
|
A7208A 36.4GB Ultra2 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
Drives
|
A7853A IDE CD-RW drive - 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read |
Graphics
|
A1299B HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory |
Graphics
|
A4552A HP VISUALIZE-fx2 graphic accelerator board - 24/8 bit accelerated 3D solids - Has EVC video connector - Requires HP-UX 10.20 with 'Additional Core Enhancements' (ACE) |
Graphics
|
A4556A Video output board for VISUALIZE-FX series graphics products only - Provides NTSC, PAL,AND S-VIDEO outputs |
Graphics
|
A4560A Texture memory upgrade for VISUALIZE-fx6 - Adds 16MB texture memory and 32KB x 32KB virtual texture cache |
Graphics
|
A4977A HP VISUALIZE-EG PCI graphics card with 4MB memory - The EG card is 8 plane with 8 overlay planes - Can be used in either a 3.3V or 5.0V PCI slot |
Graphics
|
A4982B HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz |
Interfaces
|
A4926A LAN adapter - 1000Base-SX PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
Interfaces
|
J3525A 2 Port X.25/Frame Relay adapter card for HP-UX |
Interfaces
|
J3526A WAN adapter - Four port X.25 frame relay adapter card |
Memory
|
A3863-66501 New part for A3863-69001 |
Memory
|
A3863-69001 512MB, 120MHz SDRAM DIMM memory module - (Part of A4995A) |
Memory
|
A3864-66501 New part for A3864-69001 |
Memory
|
A4994A 256MB, 120MHz SDRAM DIMM memory module |
Memory
|
A4995A 512MB, 120MHz SDRAM DIMM memory module |
Memory
|
A6016A 1024MB, 120MHz SDRAM DIMM memory module |
Monitors
|
A4978-62025 LCD display with power switch mounted in a plastic bracket - Has attached 1-inch ribbon cable with male DB-25 connector - Mounts to the front of the chassis assembly |
Parts
|
A3739A DUAL FDDI PCI LAN ADAPTER |
Parts
|
A4554A VISUALIZE FX-6 ADV. PERFORMANCE 3D |
Parts
|
A4978-40011 I/O fan and speaker bracket assembly (blue plastic) - Mounts in front of the I/O and PCI backplane board to allow the connection of a 120mm fan and system speaker - Does NOT include the PCI card guide faceplate, fan or speaker |
Parts
|
A4978-62004 Front Bezel Assembly - Includes the front plastic cover with the hard drive access door |
Parts
|
A4978-62007 DDS-3 tape (or floppy drive) mounting bracket - Mounts in the top left corner of the workstation |
Parts
|
A4978-69001 ARTEYSN - J5000 POWER SUPPLY |
Parts
|
A4978-86007 Chassis assembly for J5x00/J7000 workstations - Includes chassis with side and top panels, all cooling fans, I/O fan and speaker bracket, PCI board retainer clip, drive EMI covers and trays, floppy/CD-ROM drive data and power cables, and bus bar shield |
PC Boards and Backplanes
|
A4978-86006 New part for A4978-89006 |
PC Boards and Backplanes
|
A4978-89006 SCA hard drive interface backplane PC board assembly - Mounts on the rear of the drive bay assembly |
PC Boards and Backplanes
|
A5991-60010 New part for A5991-69010 |
PC Boards and Backplanes
|
A5991-69010 System Processor Board and tray assembly - Includes two 552MHz PA-8600 RISC processors - Mounts in the center left side of the chassis assembly |
Power Supplies
|
A4978-60001 New part for A4978-69001 |
Storage
|
A5011A 12GB DDS3 DAT |