For sales or technical support call us at 978-499-0049 or toll free at 877-667-8383
Please select a category to view the component parts for the J6700 Workstation
Part | Description |
---|---|
A5990-63004 | ATAPI IDE ribbon cable assembly - From system processor board to CD-ROM drive |
A5990-63003 | Ultra SCSI-2 LVD ribbon cable assembly - 737mm (29in) long with three SCSI connectors - From hard drive backplane PC board to system processor board |
Part | Description |
---|---|
A6036A | Deskside cover kit - For converting a rack mounted J6000, J6700, or J6750 computer into a deskside installation - Includes side covers, pedestal, bezel fillers, and instructions |
Part | Description |
---|---|
A1658-69031 | 18GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) |
A4998A | 18GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
A6739-69002 | 18GB hot-plug Ultra160 Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
A6028A | 32X CD-ROM drive - In a slimline (0.5 inches high) case with ATAPI IDE connector |
A1658-69032 | 36.4GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) |
A7208A | 36.4GB Ultra2 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
A7208-69001 | 36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
A6031A | 36GB Ultra2 Wide LVD SCSI hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
A6740-69002 | 36GB hot-plug Ultra160 Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
A7207-69001 | 73GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
A7207A | 73GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
A8069-62001 | DVD-ROM drive (Read only) - In a slimline (0.5 inches high) case with ATAPI IDE connector - Includes the chassis mounting bracket |
A8070-62001 | DVD/CD-RW drive - In a slimline (0.5 inches high) case with ATAPI IDE connector - Includes the chassis mounting bracket |
A5990-62023 | IDE CD-ROM drive - 32X CD-ROM read - Mounts in a slimline (0.5 inches high) case with ATAPI IDE connector - Includes the chassis mounting bracket |
A6055-62110 | IDE CD-RW drive - 4X CD-R write, 4X CD-RW rewrite, 24X CD-ROM read - In a slimline (0.5-inches high) case with ATAPI IDE connector - Includes the chassis mounting bracket (For use with HP-UX 11.0 or higher ONLY) |
A7854A | IDE slimline CD-RW drive - 4X CD-R write, 4X CD-RW rewrite, 24X CD-ROM read - (For use with HP-UX 11.0 or higher ONLY) |
A5990-62003 | Mounting bracket - For the SCA 'hot pluggable' hard drive - Includes front handle for removing/installing the drive |
Part | Description |
---|---|
A7789-69510 | HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system |
A7789A | HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system |
A1299B | HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory |
A4982-69502 | HP VISUALIZE-fxe (rev B) PCI graphics board - 9.5MB of texture memory (24MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982B) |
A4982-69001 | HP VISUALIZE-fxe PCI graphics board - 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982A) |
A4982A | HP VISUALIZE-fxe PCI graphics card - 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz |
A4982B | HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz |
A1299-69003 | VISUALIZE-fx10b Pro PCI graphics board - 128MB DDR SDRAM memory |
Part | Description |
---|---|
A6055B | J6700 WORKSTATION |
Part | Description |
---|---|
A6016A | 1024MB, 120MHz SDRAM DIMM memory module |
A3864-69001 | 1024MB, 120MHz SDRAM DIMM memory module - (Part of A6016A) |
A4995A | 512MB, 120MHz SDRAM DIMM memory module |
A3863-69001 | 512MB, 120MHz SDRAM DIMM memory module - (Part of A4995A) |
Part | Description |
---|---|
A5990-66530 | Backplane PC board - Small rectangular board with two SCSI SCA connectors on one side and two cable connectors on the other - For connecting the 'Hot Pluggable' hard drives to the system - Mounts on the rear of the hard drive bay |
A5990-66520 | PCI backplane PC board - Mounts on the far left side of the removable PCI card cage bay |
A6055-66510 | System Processor Board - Includes two 750MHz PA-8700 processors (rev 2.3) - Mounts in bottom of chassis |
A6055-66515 | System Processor Board - Includes two 750MHz PA-8700 processors (rev 2.3) - Mounts in bottom of chassis |
A6055-69015 | System Processor Board - Includes two 750MHz PA-8700 processors (rev 2.3) - Mounts in bottom of chassis |
Part | Description |
---|---|
A5990-62002 | Chassis assembly (Metal) - Includes the bottom chassis with the riveted in drive bay - Does NOT include the top cover or the PCI card cage assembly |
A5990-40009 | Deskside pedestal - Semi-oval shaped blue plastic piece - Mounts on the right side of the computer - Used for standing the computer on its side for deskside installations |
A5990-62007 | Front bezel (Dark Gray) - Rectangular piece of plastic with the display bezel, the push-button for the power switch, holes for the snap-in air flow louvers (NOT included - must be ordered separately) - Mounts on the front of the chassis |
A5990-62015 | LCD display and power switch assembly - Includes the LCD display, power switch, mounting bracket, and interconnecting cable - Mounts on the front of the chassis |
A5990-62006 | PCI card cage bay assembly - Includes the metal support structure, the cooling fan, and the PCI card retainer (Does NOT include the PCI backplane PC board) - Mounts in the left side of the chassis behind the drive bay |
Part | Description |
---|---|
A5990-69101 | Power Supply Assembly (600W) - Includes power supply, system speaker, power supply fans, and LCD assembly connector - Mounts in the front right corner of the chassis |
Part | Description |
---|---|
A5990-62022 | Rack mount kit - Includes the two slide rack mounting rails, the cable management arm, bezel end caps, rack ears, hardware, and instructions |
A5993A | Rack mount kit - Includes the two slide rack mounting rails, the cable management arm, bezel end caps, rack ears, hardware, and instructions |
Part | Description |
---|---|
0950-4156 | Voltage regulator module (VRM) - AC/DC converter with 38V and 42V input and 1.6V DC output, 56W - Mounts vertically in the socket next to each processor module (two used) - For use with the J6700 twin 750MHz PA-8700 processor board ONLY |
Part | Description |
---|---|
A6055A | HP J6700 Workstation w/ 2 x 750MHZ PA8700 CPU |
Cage Code 3EWZ2
NAICS Codes
On Queue Computer, Inc.
18 Graf Rd. Unit 20
Newburyport, MA 01950
Phone: (978)499-0049
Toll Free: (877) 667-8383
Fax: (978) 499-0031
sales@on-queue.com
Copyright © 2001-2025 On Queue Computer, Inc.