The Sun StorEdge[tm] S1 array is an ideal solution for rack-intensive environments where fast data transfers, efficient space utilization, and compatibility with a wide range of Sun[tm] servers are critical concerns. The device delivers excellent performance - up to 160MB/sec. throughput - while its 1U form factor, compact footprint, and a variety of rack options allow it to fit neatly into standard rack environments. Rack-optimization features such as front-to-back airflow, front-accessible hot-swap disks, front and rear LEDs, and 12-meter cabling help enable better utilization of precious rack space and help make servicing easier. The Sun StorEdge S1 array works with a variety of Sun Netra[tm] and general-purpose workgroup and enterprise servers. And together with Sun's other rack-optimized 1U servers and PCI system expander, the Sun StorEdge S1 array supports modular computing, helping companies to balance performance, storage capacity, and PCI connectivity - affordably.
Ideal incremental storage solution for all three tiers of an Internet architecture.
System takes in air from the front and exhausts to the back, for quicker, more efficient cooling. Increased manageability with Lights-Out Management and Storage Subsystem Manager software, which allows remote monitoring of enclosure, drives, and temperature.
1U form factor and variety of rack-mounting options enable system to fit 19-inch, 23-inch, 24-inch, and 600-mm racks. Three front-accessible hot-swap drive bays supporting 18.2GB and 36.4GB 10,000 rpm hard disk drives. Compatible with a variety of Sun servers including Sun Netra[tm]; backward compatible with the Netra st D130 array.
AC and DC power options and ruggedized, NEBS Level-3 packaging are ideal for deployment in a variety of powering environments and under less than ideal environmental conditions.
Sun StorEdge S1 Disk Array Specifications
Supports 19-in. and 24-in. rack configurations, with fixed-rail options Flame-resistant, fireproof metal enclosure NEBS Level-3 Certified
Status and sensors
Device and drive status information accessible from host server Front and rear LEDs for system and drive status
Ultra3 SCSI LVD (100 MB/s) Maximum cable length 12 meters for LVD and 3 meters for SE SCSI
3.5-inch low-profile, LVD
18.2 GB or 36.4 GB, 10,000 rpm
Up to 3 hot-swap hard disk drives
Sun Solaris[tm] 2.6 Operating Environment and higher
Sun[tm] Cluster 3.0 (with Netra T1 AC200/DC200, Netra E1 PCI System Extender, and Sun StorEdge S1 array)
Remote monitoring through the included Sun StorEdge S1 Storage Subsystem Manager (SSM) 2.0
Netra T1 AC200/DC200 Netra t 1120/1125 Netra t 1400/1405 Netra ct 400/800
Sun Enterprise[tm] 220R/420R Sun Fire 280R Sun Fire 15K
AC or DC
100-240 V AC, single-phase (47-63 Hz)
-48/-60 V DC
Less than 2 A at 100V AC (150 W) Less than 4 A at -40V AC (150 W)
5º C to 40º C (41º F to 104º F), 5% to 85% relative humidity, noncondensing (not to exceed 0.024 kg water/kg of dry air)
Short-term operating temperature
-5º C to 55º C (23º F to 131º F), 5% to 90% relative humidity, noncondensing (not to exceed 0.024 kg water/kg of dry air)
-40º C to 70º C (-40º F to 158º F), 90% maximum relative humidity, noncondensing
Less than 60dBa (GR-63-CORE Test Method)
Meets GR-63-CORE requirements for earthquake risk zone 4
150 W, 512 BTUs/hr
Meets or exceeds the following requirements:
UL/CSA-60950, EN60950, IEC950 CB Scheme with all country deviations
EN55022/CISPR22 Class B, FCC CFR47 Part 15 Class B, EN61000-3-2, EN61000-3-3, EN 300 386 V1.2.1 (2000-03) - Telecom Center Only
EN55024, EN 300 386 V1.2.1 (2000-03) - Telecom Center Only