| Part | Description |
| A4081-40002 | Outer right side panel |
| A4081-40003 | Pedestal base - Supporting 'foot' on the bottom of the computer - Dove Gray |
| A4081-40011 | 5.25-inch blank filler panel |
| A4081-40013 | Display mounting bracket |
| A4081-40015 | Speaker enclosure |
| A4081-60001 | New part for A4081-69001 |
| A4081-60002 | New part for A4081-69002 |
| A4081-60004 | Disk drive mounting bracket kit - Package of 2 brackets - For mounting 3.5in hard disk drives in the peripheral module assembly |
| A4081-62003 | Chassis subassembly - Base metal chassis only |
| A4081-62004 | Front cover (bezel) - Large ribbed plastic piece covering the front of the computer - Does NOT include the nameplate |
| A4081-62005 | Single-ended SCSI cable internal ribbon cable with three 50 pin (F) connectors and a terminator at one end, 0.5m (1.5ft) long |
| A4081-62006 | Fast wide SCSI internal ribbon cable - Has three high density 68 pin (M) connectors, a terminator, and a ferrite, 0.3m (1.0ft) long |
| A4081-62007 | EISA module cage - Large metal enclosure for EISA PC board |
| A4081-62008 | Motherboard carrier tray assembly - J200, J210, J280 |
| A4081-62010 | Peripheral carrier assembly - Does not include drive trays |
| A4081-62011 | SCSI-2 cable - Has a 50-pin (F) internal connector and a high density 50-pin (F) external connector - 20cm (8.0in) long |
| A4081-62012 | SCSI-3 cable - Has a 68-pin (M) internal connector and a high density 68-pin (F) external connector - 20cm (8.0in) long |
| A4081-62013 | Drive power cable - Has three 4-pin (F) connectors - 34cm (13.4in) long - For peripheral drive |
| A4081-62014 | LCD display assembly - Includes cable - Snap locks on to the front of the CPU drawer assembly |
| A4081-62021 | Speaker assembly - Mounts on the rear of the fan shroud assembly |
| A4081-62023 | Extractor lever assembly - Metal handle that mounts on the front of the power supply module assembly |
| A4081-62025 | TOC (transfer of control) button/switch/cable - Protected momentary contact pushbutton switch with attached 18cm (7.0in) long, 3-conductor cable with 3-pin (F) connector |
| A4081-62026 | I/O bulkhead assembly - Metal plate with holes for I/O connectors from I/O PCA - Includes decal surrounding holes |
| A4081-62027 | I/O support cover assembly - 'Box' shield on top of the I/O connector board mounting bracket - Includes captive screw |
| A4081-62028 | LED cable assembly - Includes a 5 pin (F) connector with an attached transistor and mounting hardware, 18cm (7.1in) long |
| A4081-62032 | Fan assembly - Includes two 60mm x 60mm x 25mm fans (12VDC, 0.22A, Panaflo FBA06A12H) each with cables attached to a single 6-position female connector |
| A4081-62044 | CD-ROM cable |
| A4081-66003 | System backplane board - System backplane board - Mounts in the main chassis assembly |
| A4081-66004 | New part for A4081-69004 |
| A4081-66007 | SCSI disk board - Interfaces the drives to the computer - SCSI disk board - Mounts in the peripheral (drive) module assembly - Interfaces the drives to the computer |
| A4081-66009 | New part for A4081-69009 |
| A4081-66011 | Jumper PCA - Small PCA with 72-PIN female connector |
| A4081-66105 | New part for A4081-69105 |
| A4081-69001 | Motherboard - Does NOT include processor modules or memory DIMMS - Motherboard - Does NOT include processor modules or memory DIMMs - Main board in the CPU drawer assembly |
| 291966-B21 | Smart Array 641 Controller |
| 291967-B21 | Smart Array 642 Controller |
| 313881-B21 | HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter |
| 321835-B21 | HP StorageWorks FC2214DC 2 Gb, Dual Port, 64-Bit/133 MHz PCI-X HBA |
| 331346-B21 | CD-RW/DVD-ROM Combo Drive Option Kit |
| 331903-B21 | Slimline CD-RW/DVD-ROM 24X Combo Drive Option Kit |
| 343055-B21 | 1 GB (2 x 512 MB 1RANK) PC2-3200R 400MHz DDR2 with Advanced ECC and online spare memory capabilities |
| 343056-B21 | 2 GB (2 x 1 GB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit |
| 343057-B21 | 4 GB (2 x 2 GB 1RANK) PC2-3200R 400MHz DDR2 with Advanced ECC and online spare memory capabilities. |
| A4081-69002 | EISA backplane board - Includes the rear panel RS-232C and HP-HIL connectors - EISA backplane board - Mounts on the right side of the EISA module assembly - Includes the rear panel RS-232C and HP-HIL connectors |
| A4081-69004 | I/O connector board - Includes the audio, keyboard, parallel, AUI LAN, and UTP connectors - I/O connector board - Includes the audio, keyboard, parallel, AUI LAN, and UTP connectors - Mounts to the I/O support bracket on the rear of the computer |
| A4081-69009 | 1280 x 1024 2D 8-plane color graphics board - 1280 X 1024 2D 8-Plane Color Graphics Board (P/O A4077A) |
| A4081-69105 | Dual output 1280 x 1024 2D 8-plane color graphics board - Dual Output 1280 X 1024 2D 8-Plane Color Graphics Board (P/O A4078A) |
| A4081-84008 | Nameplate - 9000 model J200 class series computer logo |
| A4081-84009 | Nameplate - 9000 model J210 class series computer logo |
| AB312A | HP Integrity rx7640 Server - Base Chassis with 1 core I/O and 2 power supplies |
| AB313A | Processor/memory cell board |
| AB314A | Core I/O |
| AB351B | DVD +RW Drive |
| AB367A | PA-RISC 8900 1.1 GHz processor assembly (2 processors) |
| A4125-40002 | Fan bracket and PCI card guide - For use in computers upgraded to use VISUALIZE graphics |
| A4125-60001 | New part for A4125-69201 |
| A4125-60010 | New part for A4125-69010 |
| A4125-60012 | New part for A4125-69012 |
| A4125-60016 | New part for A4125-69016 |
| A4125-60021 | New part for A4125-69121 |
| A4125-63001 | Ultra Wide/Single-Ended SCSI ribbon cable with termination - Has a 68-pin (F) connector on one end and three 68-pin (M) connectors for the drives - 63.8cm (25.1in) long - From 68-pin hard drives to drive interconnect board on the rear of the drive tray |
| A4125-66504 | New part for A4125-69500 |
| A4125-66520 | New part for A4125-69520 |
| A4125-69010 | System processor board - Includes 200MHz PA-8200 RISC processor - C200 System Processor Board - Mounts on the Left Side of the Computer - Includes 200MHz PA-8200 RISC processor |
| A4125-69012 | System processor board - Includes 236MHz PA-8200 RISC processor - C240 System Processor Board - Mounts on the Left Side of the Computer - Includes 236MHz PA-8200 RISC processor |
| A4125-69016 | System processor board - Includes 367MHz PA-8500 RISC processor - C360 System Processor Board - Mounts on the Left Side of the Computer - Includes 367MHz PA-8500 RISC processor |
| A4125-69121 | I/O board assembly ('L' shaped) - Includes rear panel audio in/out, Wide Single-Ended SCSI, and parallel connectors - I/O Board Assembly ('L' Shaped) - Includes Rear Panel Audio In/Out, Wide Single-Ended SCSI, and Parallel Connectors - Side of the Compute |
| A4125-69201 | 550-watt power supply kit - Includes power supply, power distribution board, power distribution bracket, and speaker assembly - Mounts in right side of computer |
| A4125-69500 | Backplane board with EISA - For 550W power supply - Backplane Board with EISA - for 550W Power Supply - Vertical Board in the Center of the Computer |
| A4125-69520 | I/O connector board - Small board with 10/100BT LAN, serial ports, and mouse/keyboard connectors - I/O Connector Board - Small Board (on Rear Left Side) with 10/100BT LAN, Serial Ports, and Mouse/Keyboard Connectors |
| A4125-84005 | Nameplate - 9000 'VISUALIZE' C200 series workstation logo |
| A4125-84022 | Nameplate - 9000 'VISUALIZE' C360 seriesworkstation logo |
| A4167A | Enhanced Video Connector (EVC) video adapter cable - EVC (F) to 15-pin (M), 20cm (7.87in) long - Used to connect EVC video output to 15-pin monitor connector |
| A4168A | Enhanced Video Connector (EVC) video adapter cable - EVC (M) to 15 pin (F), 20cm (7.87in) long - Used to connect EVC video output to a 15-pin monitor connector |
| A4171A | Single-Ended SCSI-2 CD-ROM drive - 4X CD-ROM read |
| A4177AR | 256MB memory upgrade kit - Includes two 128MB DIMM modules |
| A4179A | Hyper CRX-24Z graphics adapter board - With 24 bit planes for accelerated 3D solids |
| A4190-00049 | Captive screw (thumb screw) - 6-32 thread - For securing the main tray in the chassis assembly |
| A4190-40013 | Tower stand - Mounts on the left side of the computer - For deskside applications |
| A4190-40016 | Fan shroud in rear of main tray assembly - Holds the speaker and both main fans |
| A4190-40018 | Filler panel - For empty 3.5-inch drive bays |
| A4190-40023 | Memory retainer clip - Mounts to side of storage tray assembly - Holds memory modules in place |
| A4190-60013 | New part for A4190-69013 |
| A4190-60028 | New part for A4190-69128 |
| A4190-60032 | New part for A4190-69132 |
| A4190-61601 | Single-Ended SCSI-2 ribbon cable - Three 50-pin (F) internal connectors and a high density 50-pin (F) connector with latch clips for the rear panel - 75cm (29.5in) long - From system processor board to disk drive tray assembly |
| A4190-61602 | Wide Differential SCSI ribbon cable with a ferrite - Has three 68-pin (M) internal connectors and a 68-pin (F) connector for the rear panel - 94cm (37in) long - From optional Wide Differential SCSI-2 controller to disk drive tray assembly |
| AB378A | 1 Port 4 GB PCI-X Fibre Channel HBA for HP-UX and OpenVMS |
| AB378B | PCI-X 1-port 4Gb Fibre Channel card |
| AB379A | 2 ports 4 GB PCI-X Fibre Channel HBA |
| AB379B | Dual-port 4Gbps Fibre Channel, PCI-X 266MHz card |
| AB400A | DAT 72 GB Drive |
| AB404A | TPM Integrated Security Chip |
| AB429A | Single-port 4Gbps Fibre Channel, PCI-X 266MHz card for Linux and Windows |
| AB442A | HP Integrity rx8640 Server Flexible Advantage STarter (FAST) with 4-processor cores |
| A4190-61603 | Floppy ribbon cable - 26-pin (M) connector marked 'This end to floppy' to 26-pin (M) connector - 35.3cm (13.9in) long |
| A4190-62020 | Hard drive tray/bracket - Hard drive tray - Mounts in rear or bottom front of disk drive tray assembly |
| A4190-62025 | Filler panel - For empty 5.25-inch drive bays |
| A4190-62030 | Tubeaxial fan - 90mm x 90mm - One Used to cool the power supply and one used to Cool the plug-in boards (if the computer was NOT upgraded to use VISUALIZE-FX series graphics board) |
| A4190-62043 | Chassis assembly - Includes all covers, disk filler panels, main tray, storage tray, hard drive trays, floppy tray, fans, speaker, light pipe, rear panel assembly (with handle) |
| A4190-62048 | Disk drive tray/holder assembly - Metal structure which houses the system drives - Includes a floppy tray - Does not include hard drive tray, cables, fan, bezel, or filler panels |
| A4190-66501 | Fast Wide Differential SCSI-2 interface board - Wide Differential SCSI-2 Interface Board - Attaches to Side of Backplane Board (A2889A) |
| A4190-69013 | System processor board - 132MHz - System Processor Board |
| A4190-69128 | System processor board - 180MHz - System Processor Board |
| A4190-69132 | System processor board - 132MHz - System Processor Board |
| A4190-84009 | Nameplate - 9000 'VISUALIZE' B132L seriesworkstation logo |
| A4190-84012 | Nameplate - 9000 'VISUALIZE' B180L series workstation logo |
| AB444A | HP Integrity rx8640 Server Flexible Advantage STarter (FAST) with 16-processor cores |
| AB445A | HP Integrity rx8640 Server Flexible Advantage STarter (FAST) with 24-processor cores |
| AB446A | HP Integrity rx8640 Server Flexible Advantage STarter (FAST) with 32-processor cores |
| A4200-00060 | Hard disk drive EMI shield - Disk EMI shield - Mounts to the bottom of the hard drive(s) |
| A4200-00092 | CD-ROM drive EMI shield - CD ROM EMI shield - Mounts to the bottom of the CD ROM drive |
| A4200-00093 | Floppy disk drive EMI shield - Floppy EMI shield - Mounts to the bottom of the floppy drive |
| A4200-00094 | DDS tape drive EMI shield - DDS EMI shield - Mounts to the bottom of the DDS tape drive |
| A4200-40011 | Fan diffuser - Rectangular adapter with molded fan retaining clips (Dove Gray plastic) - Used to mount the rear panel fans (two used) |
| A4200-40018 | Tower stand (Parchment White) - Mounts on the left side of the computer - For deskside applications) |
| A4200-40053 | Drive tray filler panel (Dove Gray) - For empty multimedia drive slots |
| A4200-40065 | EISA board retainer clip - Holds the EISA boards in the backplane slots |
| A4200-60004 | Drive interconnect board kit - Includes 2 thumbscrews and board - Drive Interconnect Board Kit - Includes 2 Thumbscrews and Board - Mounts on Rear of Drive Tray |
| A4200-60005 | New part for A4200-69005 |
| A4200-60012 | New part for A4200-69512 |
| A4200-60018 | New part for A4200-69118 |
| A4200-60021 | New part for A4200-69521 |
| A4200-60022 | New part for A4200-69022 |
| A4200-61602 | SCSI ribbon cable with termination - 50-pin (F) connector marked 'Single-Ended SCSI disk interface board' and 50-pin (F) connector marked 'Single-Ended SCSI device' - 30.5cm (12in) long - From multimedia drives to drive interconnect board on the rear of t |
| A4200-61603 | Fast Wide SCSI ribbon cable with ferrite and termination - Has four 68-pin (M) connectors - 64.8cm (25.5in) long - From hard dives to drive interconnect board on the rear of the drive tray |
| A4200-61604 | Floppy drive ribbon cable - 34-pin (F) connector marked 'Disk interface board' to 34-pin (F) connector marked 'Floppy drive' - 38.7cm (15.3in) long - From floppy drive to drive interconnect board on the rear of the drive tray |
| A4200-61605 | Disk power cable - 4-pin (F) connector marked 'PCB end' and four other 4-pin (F) connectors - 74cm (29.2in) long - From drive interconnect board to all of the devices in the drive tray |
| A4200-61606 | Ribbon cable - Has two 26-pin (F) connectors marked 'Human interface' - 36.2cm (14.3in) long - From human interface board to drive interconnect board on the rear of the drive tray |
| A4200-61607 | CD audio cable - 3-pin (F) connector to 3-pin (F) connector - 23cm (9in) long - From system board to CD-ROM drive |
| A4200-62046 | EISA slot cover plate (with quarter turn fastener) - Covers empty EISA slot (s) on rear panel - Up to four used |
| A4200-62054 | Floppy drive bezel - Complete front panel for the floppy drive - Includes bezel, door, button, & lite pipe - Quartz Gray |
| A4200-62059 | Chassis assembly (Quartz gray) - Includes all covers, the light pipe, vented disk filler panels, main tray, disk drive tray, and rear panel assembly (with handle) |
| A4200-66500 | Backplane board with option board slot connectors - Backplane Board (with Option Board Slot Connectors) - Vertical Board in the Center of the Computer |
| A4200-66501 | New part for A4200-69511 |
| A4200-66514 | New part for A4200-69014 |
| A4200-66534 | Human interface board - Includes power switch, status LED'S, and audio I/O - Human Interface Board - Includes Power Switch, Status LED's, and Audio I/O - Mounts on the Lower Front of the Drive Tray |
| A4200-66541 | New part for A4200-69541 |
| A4200-66545 | New part for A4200-69045 |
| AB447A | HP Integrity rx7640 Server Flexible Advantage STarter (FAST) with 4-processor cores |
| AB448A | HP Integrity rx7640 Server Flexible Advantage STarter (FAST) with 8-processor cores |
| AB449A | HP Integrity rx7640 Server Flexible Advantage STarter (FAST) with 12 -processor cores |
| AB450A | HP Integrity rx7640 Server Flexible Advantage STarter (FAST) with 16-processor cores |
| AB451A | Dual-core Intel Itanium 2 processor 1.6GHz with 12 MB (1 Processor / 2 Cores) |
| A4200-69005 | 385-watt power supply kit - Includes power supply, power distribution board, power distribution bracket, and speaker assembly - Mounts in right side of computer |
| A4200-69014 | system processor board - 160MHz, PA-7300 based - 160MHz System Processor Board (PA 7300 Based) - Mounts on the Left Side of the Computer |
| A4200-69022 | I/O board assembly ('L' shaped) - Includes rear panel audio in/out and SCSI/parallel connectors - I/O Board Assembly ('L' Shaped) - Includes Rear Panel Audio In/Out and SCSI/Parallel Connectors - Mounts on the Right Side of the Computer |
| A4200-69045 | 512kB, 100MHz cache memory module - Plugs into one of two sockets on the system processor board (1MB kit is A4299A) |
| A4200-69118 | System processor board - 180MHz - 180MHz System Processor Board - Mounts on the Left Side of the Computer |
| A4200-69511 | Backplane board with option board slot connectors - Backplane Board (with Option Board Slot Connectors) - Vertical Board in the Center of the Computer |
| A4200-69512 | system processor board - 120MHz - 120MHz System Processor Board - Mounts on the Left Side of the Computer |
| A4200-69521 | I/O board assembly ('L' shaped) - Includes rear panel audio in/out and SCSI/parallel connectors - I/O Board Assembly ('L' Shaped) - Includes Rear Panel Audio In/Out and SCSI/Parallel Connectors - Mounts on the Right Side of the Computer |
| A4200-69541 | I/O connector board - Small board with 10BT LAN, serial ports, and mouse/keyboard connectors - I/O Connector Board - Small Board (on Rear Left Side) with 10BT LAN, Serial Ports, and Mouse/Keyboard Connectors |
| A4200-84025 | Nameplate - 9000 'VISUALIZE' C160L series workstation logo |
| A4200-84028 | Nameplate - 9000 'VISUALIZE' C180-XP series workstation logo |
| A7131A | 8 GB PC2100 DDR-SDRAM memory quad (4 x 2GB DIMMs) |
| A4207A | 32MB ECC memory upgrade kit - Includes two 16MB SIMM modules |
| A4207AR | 32MB ECC memory upgrade kit - Includes two 16MB SIMM modules |
| A4208A | 128MB ECC DIMM memory upgrade kit - Includes two 64MB DIMM modules |
| A4208AR | 128MB ECC DIMM memory upgrade kit - Includes two 64MB DIMM modules |
| A4209A | 64MB ECC memory upgrade kit - Includes two 32MB SIMM modules |
| A4209AR | 64MB ECC memory upgrade kit - Includes two 32MB SIMM modules |
| A4214A | 2GB Differential Fast Wide SCSI-2 hard drive - 3.5-inch form factor |
| A4242-66001 | New part for A4242-69001 |
| A4242-69001 | Z-buffer accelerator board - For hyper CRX-8 or hyper CRX-24 graphics boards - Z-Buffer Accelerator Board (A4242A, 1 of 2 Boards in A4079B, 1 of 2 Boards in A4441A, 1 of 2 Boards in A4442A) - For HyperCRX-8 (A4070B) or HyperCRX-24 (A4071B) Graphics Boards |
| A4243A | 12GB/24GB Single-Ended SCSI DDS-3 DAT tape drive with Flint Gray bezel |
| A4244-66001 | New part for A4244-69001 |
| A4244-66002 | New part for A4244-69002 |
| A4244-66003 | Front plane board, 3-wide - Front Plane Board, 3-Wide - Attached to Top of Boards (1 of 4 Boards or 1 of 5 Boards in a 3-Wide A4211A/A4244A/A4246A Configuration) |
| A4244-66004 | Front plane board, 2-wide - Front Plane Board, 2-Wide - Attached to Top of Boards (1 of 3 Boards in a 2-Wide A4211A/A4244A/A4246A Configuration - 3-Wide Configurations have 4 or 5 Boards) |
| A4244-69001 | Geometry accelerator board - Geometry Accelerator Board (1 of 3 Boards in a 2-Wide Configuration - 3-Wide Configurations have 4 or 5 Boards) Part of A4211A or A4244A |
| A4244-69002 | Frame buffer board - Frame Buffer Board (1 of 3 Boards in a 2-Wide A4211A or A4244A Configuration - 3-Wide Configurations have 4 or 5 Boards) |
| A4244-70001 | New part for A4244-79001 |
| A4244-79001 | VISUALIZE 48 board kit - Includes 3-wide front plane board, geometry accelerator board, and frame buffer board - Visualize 48 board kit - Includes 3-wide Front Plane Board, Geometry Accelerator Board, and Frame Buffer Board (Part of A4211A or A4244A) |
| A4244A | VISUALIZE-48 (Hyper CRX-48Z3) accelerated 3D solids graphics adapter - With 24/24 double buffered image planes for 2D imaging and 3D wireframe |
| A4248-66001 | Video out board - Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board - (Part of A4248A) - For A4070B, A4071B, A4079B, A4211A, A4244A, A4246A, A4441A, A4442A in HP9000 B/C/J Class |
| A4248A | Video out board - Provides NTSC, PAL, and S-video outputs - Ships with no cables - For A4070B, A4071B, A4079B, A4211A, A4244A, A4246A, A4441A, A4442A in HP9000 B/C/J class |
| A4249A | 12GB/24GB Single-Ended SCSI-2 DDS-3 tape (DAT) drive |
| A4282A | 650MB Single Ended SCSI-2 CD-ROM drive |
| A4283A | 1.44MB 3.5-inch Single-Ended SCSI-2 floppy drive |
| A4283D | 1.44MB 3.5-inch Single-Ended SCSI-2 floppy drive |
| A4299A | 1MB second-level cache memory upgrade - Includes two 512kB memory modules |
| A4323-63001 | Ultra Wide Single-Ended SCSI-2 cable with ferrite - Has three 68-pin (M) internal connectors and a high density 68-pin (F) connector for the rear panel - 93.7cm (36.9in) long |
| A7143A | 4-channel Smart Array Ultra160 RAID controller |
| A8002A | Single port 4 GB Fibre Channel, PCI-e |
| A8003A | Dual-port 4 GB Fibre Channel, PCI-e |
| A9776A | 36GB 15k rpm Hot-plug Ultra320 SCSI drive |
| A9778A | 146GB 10k rpm Hot-plug Ultra320 SCSI drive |
| A9835A | 32-socket add-on Cabinet |
| A9843A | 8 GB memory module (8 x 1 GB DDR-II DIMM) |
| A9846A | 16 GB memory module (8 x 2 GB DDR-II DIMM) |
| A9852A | I/O chassis enclosure for 12-slot PCI-X chassis |
