| Part | Description |
| 370-2812 | FDDI/P DAS 1.0 |
| 370-2882 | 7-14GB 8 mm Tape Drive (Medium Grey Bezel) |
| 370-3280 | 4-8 GB 1/4" SLR Tape Drive |
| 370-3403 | IBM DDRS-34560 (4.2GB - 7200 RPM) |
| 370-3404 | IBM DDRS-39130 (9.1GB 7200 RPM) |
| 0380-4081 | Snap-in standoff - 0.375-inch long, 0.171-inch O.D. - For graphics board (four used) |
| 0515-0431 | Pan head machine screw - M3.5 x 0.6, 6mm long, Torx T15 recess, conical washer - Stainless steel, passivated finish - For the power supply |
| 0950-3021 | Switching power supply (Delta DPS-200QP) - 115-230VAC input, 50-60Hz - Five DC outputs, 200 watts - Mounts in the bottom of the left side of the main tray assembly |
| 0950-3758 | Master voltage regulator module (VRM) - DC-DC power module, 12VDC nominal input, 1.3-3.5VDC output @ 16A |
| 0950-3759 | Slave voltage regulator module (VRM, Lucent/Agere 108457771) - DC-DC power module, 12VDC nominal input, 1.3-3.5VDC output @ 16A |
| 0950-9074M | 1.44MB, 3.5-inch Single-Ended SCSI floppy drive - (Part of A4283A) - In early releases of the 9000/C1xx series computers |
| 0950-9076 | New part for 0957-0086 |
| 0957-0086 | Switching power supply (Astec AA191180) - 88-269VAC input, 47-66Hz - Five DC outputs, 470 watts - Does NOT include the extractor - Plugs into the lower right front of the computer |
| 0957-0284 | Switching power supply (Delta) - 120/240VAC input, 47-66Hz - Five DC outputs, 385 watts - Mounts in right side of computer - No longer supplied - Order Power Supply Kit |
| 1150-1895 | New part for C2293-69004 |
| 1252-3920 | Single-Ended SCSI active terminator - Has 50-pin low density connector (M) with bail locks - (K2291) |
| 1252-4367 | SCSI cable screw (screwlock) - Female, for subminiature D-connector - 4-40 external thread, 2-56 internal thread, 0.562-in long - Stainless steel - Used to mount SCSI cables to the rear of the disk drive tray assembly (two used per cable) |
| 1253-0635 | Enhanced Video Connector (EVC) video adapter cable - EVC (M) to 15-pin (F), 20cm (7.87in) long - Used to connect EVC video output to 15-pin monitor connector |
| 1420-0314 | 3.0V battery - Lithium - Same as BR2325, CR2325, or equivalent - Not rechargeable |
| 2090-0552 | 20-inch color monitor (Sony 20N-2-QUARTZ, Quartz Gray) - 88-138VAC, 47-63HZ input - 15-pin male D-sub connector - For the Southern hemisphere - (replaceable monitor for A4331E) |
| 2090-0556 | 17-inch color monitor (Samsung CMH7379L/QUARTZ, Quartz Gray) - 88-294VAC, 47-63HZ input - 15-pin female D-sub connector - For the Southern hemisphere - (replaceable monitor for A4330E) - (Part of A4330E) |
| 242781-001 | Cleaning cartridge - For DDS (DAT) tape drives |
| 25560-60001 | New part for 25560-69001 |
| 25560-69001 | EISA HP-IB host adapter board - EISA HP-IB Host Adapter Board (25560A) |
| 25560A | EISA HP-IB interface board - EISA HP-IB Interface - Occupies EISA Slot in Computer |
| 25565-60002 | New part for 25565-69002 |
| 25565-69002 | EISA PSI board - Provides SNA/X.25 LAN connection - High Speed EISA X.25 Board (P/O J2794A) |
| 28641B | HP ThinLAN (10Base-2) transceiver - Has AUI and BNC connectors (AUI cable not included) - Connects to the AUI port |
| 3160-0869 | Tubeaxial fan (Matsushita FBA06A12H) - 60mm x 60mm x 15mm, 12VDC, 16.6CFM - Includes 310mm (12.2in) long cable assembly - Mounts to the rear of the shroud for the processor board(s) |
| 46020-60001 | HP-HIL keyboard cable assembly (coiled) - 3m (9.8ft) long - For the 46020x and 46021x series of keyboards |
| 46021-60401 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABA, English) - (Part of A1099C) |
| 46021-60402 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABC, Canadian-French) - (Part of A1099C) |
| 46021-60403 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABD, German) - (Part of A1099C) |
| 46021-60406 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABH, Dutch) - (Part of A1099C) |
| 46021-60408 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABM, Latin America-Spanish) - (Part of A1099C) |
| 46021-60409 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABN, Norwegian) - (Part of A1099C) |
| 46021-60410 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABQ, Swiss-French) - (Part of A1099C) |
| 46021-60412 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABS, Swedish) - (Part of A1099C) |
| 46021-60413 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABU, For the United Kingdom) - (Part of A1099C) |
| 46021-60415 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABX, Finnish) - (Part of A1099C) |
| 46021-60417 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABZ, Italian) - (Part of A1099C) |
| 46021-60418 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option ABJ, Japanese-Katakana) - (Part of A1099C) |
| 46021-60421 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option AB1, Korean) - (Part of A1099C) |
| 46021-60423 | HP-UX keyboard assembly (Parchment white) - Includes the HP-HIL cable assembly (Option AB0, Taiwan-Traditional Chinese) - (Part of A1099C) |
| 5062-3351 | Transceiver retainer (metal bracket) - Screws to the AUI connector port standoffs - (Part of A2670A) |
| 397326-B21 | Dual-Core Intel Xeon Processor 5050 (3.0 GHz, 95 Watts, 667 FSB) |
| 397326-L21 | Dual-Core Intel X5050 (3.0 GHz, 95 Watts, 667 FSB) DL380G5 FIO Kit |
| 397328-B21 | Dual-Core Intel Xeon Processor 5060 (3.2GHz, 130 Watts, 1066 FSB) |
| 397328-L21 | Dual-Core Intel X5060 (3.2GHz, 130 Watts, 1066 FSB) DL380G5 FIO Kit |
| 397409-B21 | 1 GB FBD PC2-5300 2 x 512 MB Kit |
| 397411-B21 | 2 GB FBD PC2-5300 2 x 1 GB Kit |
| 397413-B21 | 4 GB FBD PC2-5300 2 x 2 GB Kit |
| 397415-B21 | 8 GB FBD PC2-5300 2 x 4 GB Kit |
| 5183-2679 | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10.0m (33ft) long - (C2925A) |
| 5183-7740 | Single-Ended SCSI-2 active terminator - Has 50-pin high density (M) connector with thumbscrews |
| 5183-7741 | SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.0m (3.3ft) long |
| 79909-3080 | Video cable with Enhanced Video Connectors (EVC) on both ends - 1.8m (6.0ft) long |
| 8120-2371 | Power cord (Black) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA and Canada) |
| 8120-4998 | Single-Ended SCSI-2 interface cable with bail locks on both ends - 50-pin low density (M) to 50-pin low density (M) - 1.0m (3.3ft) long - (92222B) |
| 8120-5159 | Single-Ended SCSI-2 interface cable with bail locks on both ends - 50-pin low density (M) to 50-pin low density (M) - 2.0m (6.6ft) long - (92222C) |
| 8120-5160 | Single-Ended SCSI-2 interface extension cable with bail locks on both ends - 50-pin low density (M) to 50-pin low density (F) - 1.0m (3.3ft) long - (92222D) |
| 8120-5548 | Single-Ended SCSI-2 interface cable with thumbscrews on both ends - 50-pin high density (M) to 50-pin high density (M) - 1.0m (3.3ft) long - (C2908A) |
| 8120-6147 | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 0.5m (1.6ft) long - (A3401A Option 005, C6509A) |
| 9164-0334 | 1.3GB (2.6GB with 2:1 compression) DDS-1 60m tape cartridge |
| 92192X | 1.42/1.44MB 3.5in high-density disks (Unformatted) (10/BOX) |
| 92222A | Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 0.5m (1.6ft) long |
| 92222B | Single-Ended SCSI-2 interface cable with bail locks on both ends - 50-pin low density (M) to 50-pin low density (M) - 1.0m (3.3ft) long |
| 92222C | Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 2.0m (6.6ft) long |
| 92222D | Single-ended SCSI-2 interface extension cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (F) - 1.0m (3.3ft) long |
| 92283L | DDS cartridge storage box - Includes security lock and file hanger adapter - Holds up to 12 cartridges |
| 9300-1408 | Disposable ESD ground wrist strap |
| A1236-60001 | New part for A1236-69001 |
| A1236-69001 | 32MB, 72-pin ECC DIMM memory module - Must be installed in pairs of equal size (1/2 of 64MB kit A4209A) |
| A1658-60007 | New part for A1658-69007 |
| A1658-60013 | 1.44MB SCSI-2 floppy drive with (Parchment White) bezel |
| A1658-60020 | New part for A1658-69020 |
| A1658-60021 | New part for A1658-69021 |
| A1658-60022 | New part for A1658-69022 |
| A1658-60025 | Single-Ended SCSI-2 CD-ROM drive (Quartz Gray) - 32X CD-ROM read |
| A1658-62020 | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long - (C2924A) |
| A1658-62021 | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 5.0m (16ft) long - (A3401A Option 001, C6510A, part of A6304A) |
| A1658-62023 | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 20.0m (66ft) long - (C2926A) |
| A1658-62070 | Ultra Wide Single-Ended SCSI-2 active terminator - Has 68-pin high density (M) connector with thumbscrews - (C2972A) |
| A1658-62103 | New part for A1658-69103 |
| A1658-62109 | New part for A1658-69109 |
| A1658-63013 | High Voltage Differential/Fast Wide Differential SCSI terminator - Has 68-pin high density (M) connector with thumbscrews - (C2905A) |
| A1658-69007 | 1GB SCSI hard drive - 3.5-inch form factor |
| A1658-69010 | 2.0GB Differential Fast Wide SCSI-2 hard drive - 7,200 RPM, 3.5-inch form factor |
| A1658-69020 | 2.0GB Ultra Wide Single-Ended SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - (Part of A4568A, A4571A) |
| A1658-69021 | 4.0GB Ultra Wide Single-Ended SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - (Part of A4569A, A4572A) |
| A1658-69022 | 9.1GB Ultra Wide Single-Ended SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.6-inch high - (Part of A4570A, A4573A) |
| A1658-69103 | 2.0GB Fast Wide Differential SCSI hard drive - 3.5-inch form factor - (Part of A4119A and A4119AR) |
| A1658-69109 | 1GB Fast Wide SCSI hard drive - 3.5-inch form factor |
| A2084-60016 | New part for A2084-69016 |
| A2084-69016 | 2.0GB Fast Wide Differential SCSI-2 hard disk drive - 3.5-inch form factor, low profile - (Part of A4214A) |
| A2263-40042 | Rubber foot (Misty Blue, L-shaped) - Replacement rubber foot for the bottom of the computer case (four used) |
| A2263-40049 | Rubber foot (Parchment White, L-shaped) - Replacement rubber foot for the bottom of the computer case (four used) |
| 013059-001 | System board, ProLiant DL580 G5 Server |
| 013065-001 | Memory expansion board |
| 013068-001 | SPI board |
| 013081-001 | PCI-X 3 Slot Option Card |
| 013084-001 | PCI Express x8 3 Slot Option Card |
| 013151-001 | SAS backplane |
| C7497C | DAT 40m Array Module |
| P9624A | 15" LCD Flat Panel Display |
| Q1524C | DAT 72m Array Module |
| Q1592B | DVD+RW Array Module |
| 353802-014 | Processor heatsink assembly, 50/80W4 |
| 431935-001 | 72 GB, 15,000 rpm, 6.35 cm (2.5 in) |
| 432230-001 | 146 GB, 10,000 rpm, 6.35 cm (2.5 in) |
| 437572-B21 | 800/1200W AC Power Supply |
| 438090-B21 | Quad-Core Intel Xeon E7340 Processor (2.4 GHz, 2x4M cache, 80 Watts) |
| 438090-L21 | HP DL580G5 2.4 2x4M QC E7340 kit, FIO |
| 438091-B21 | Quad-Core Intel Xeon E7330 Processor (2.4 GHz, 2x3M cache, 80 Watts) |
| A2375-66056 | New part for A2375-69156 |
| A2375-66057 | New part for A2375-69157 |
| A2375-69156 | HP PA-RISC processor - 120MHz, 256KB + 256KB I/D cache - For 9000/J210 ONLY - Also for second processor (Part of A4278A) |
| A2375-69157 | HP PA-RISC processor - 100MHz, 256KB + 256KB I/D cache - For 9000/J200 ONLY - Also for second processor (Part of A4277A) |
| A2579-60001 | New part for A2579-69001 |
| A2579-69001 | 16MB, 72-pin ECC DIMM memory module - Must be installed in pairs of equal size (1/2 of 32MB kit A4207A) |
| A2580-60001 | New part for A2580-69001 |
| A2580-69001 | 64MB, 72-pin ECC DIMM memory module - Must be installed in pairs of equal size (1/2 of 128MB kit A4208A) |
| 438091-L21 | HP DL580G5 2.4 2x3M QC E7330 kit, FIO |
| A2670A | ThinLAN (10Base-2) Ethernet transceiver kit - Includes transceiver and retainer clip - Plugs into the AUI port |
| A2679-60003 | New part for A2679-69003 |
| A2679-69003 | Fast Single-Ended SCSI-2 EISA host bus adapter board - Single Ended SCSI-2 Interface Board - Plugs into an EISA Bus Slot (A2679A) |
| A2838A | HP-HIL three-button mouse (Parchment White) - Has attached 7.71ft (2.35m) cable with 4-pin HP-HIL connector - For use with the 46021x series of keyboards (Part of A1099C) |
| A2840-60209 | PS/2 keyboard assembly (Parchment White, 102 key PC/AT layout) - Includes cable with 6-pin mini-DIN connector - (Option ABN, Norwegian) - (Part of A4030A) |
| A2840-60231 | PS/2 keyboard assembly (Parchment White, 101 key PC/AT layout) - Includes cable with 6-pin mini-DIN connector - (Option AB0, Taiwan - Traditional Chinese) - (Part of A4030A) |
| A2874-66005 | New part for A2874-69006 |
| A2874-69006 | Fast Wide Differential SCSI-2 GSC/HSC interface board - (Part of A4107A) |
| A2876-00006 | Peripheral assembly EMI divider - Metal plate |
| A2876-60011 | Drive assembly cooling fan |
| A2876-62004 | Front cover (bezel) - Large ribbed plastic piece covering the front of the computer - Does NOT include the nameplate |
| A2889A | Wide differential SCSI-2 interface board - Wide Differential SCSI-2 Interface Board - Attaches to Side of Backplane Board |
| A2889AR | Remarketed wide differential SCSI-2 interface board - Remarketed Wide Differential SCSI-2 Interface Board - Attaches to Side of Backplane Board |
| A3352-60003 | New part for A3352-69003 |
| A3352-69003 | 4GB Single Ended SCSI-2 hard drive - 3.5-inch form factor |
| A3398-60014 | New part for A3398-69014 |
| A3398-66008 | New part for A3398-69008 |
| A3398-69008 | HP PA-RISC 7200 processor module - 120MHz processor and 1MB x 1MB cache - For 9000/J210XC ONLY- Also for second processor (Part of A4478A) |
| A3398-69014 | 128MB, 72-pin ECC DIMM memory module - Must be installed in pairs of equal size (1/2 of 256MB kit A4177A) |
| A3828-60001 | New part for A3828-69001 |
| A3828-69001 | 32MB, 50nS, 72-pin EDO (Extended Data Output) SIMM memory module - Must be installed in pairs of equal size (1/2 of 64MB kit A4515A) |
| A3829-60001 | New part for A3829-69001 |
| A3829-69001 | 64MB, 50ns, 72-pin EDO DIMM memory module - Must be installed in pairs of equal size (1/2 of 128MB kit A4516A) |
| A3830-60001 | New part for A3830-69001 |
| A3830-69001 | 128MB, 50ns, 72-pin EDO DIMM memory module - Must be installed in pairs of equal size (1/2 of 256MB kit A4517A) |
| A4029A | 1.44MB slim line floppy drive |
| A4030-60413 | 'VIZUALIZE' PS/2 keyboard assembly (Quartz Gray, 102 key layout) - Has attached 1.8m (6.0ft) cable with 6-pin mini-DIN connector (For the United Kingdom) - (Part of A4030D) |
| A4070-66504 | New part for A4070-69514 |
| A4070-66505 | New part for A4070-69515 |
| A4070-69514 | Hyper CRX-8 - 1280 x 1024 accelerated 2D/3D wireframe double-buffered 8-plane color graphics board with 8 overlay planes - Hyper CRX-8 - 1280 X 1024 Accelerated 2D/3D Wireframe Double-Buffered 8-Plane Color Graphics Board with 8 Overlay Planes (P/O A4070A |
| A4070-69515 | Hyper CRX-8 graphics adapter - With 8/8 double-buffered image planes for 2D vector and 3D wireframe - Hyper CRX-8 Graphics Adapter - with 8/8 Double Buffered Image Planes for 2D Vector and 3D Wireframe (P/O A4070B, 1 of 2 Boards in A4079B, 1 of 2 Boards i |
| A4070A | Hyper CRX-8 graphics adapter board - With 8/8 double buffered image planes for 2D vector and 3D wireframe |
| A4070B | Hyper CRX-8 graphics adapter board - With 8/8 double buffered image planes for 2D vector and 3D wireframe |
| A4071-66507 | New part for A4071-69517 |
| A4071-66508 | New part for A4071-69518 |
| A4071-69517 | Hyper CRX-24 - 1280 x 1024 accelerated 2D/3D wireframe 24-plane color graphics board with 8 overlay planes - Hyper CRX-24 - 1280 X 1024 Accelerated 2D/3D Wireframe 24-Plane Color Graphics Board with 8 Overlay Planes (P/O A4071A, 1 of 2 Boards in A4179A) |
| A4071-69518 | Hyper CRX-24 graphics adapter board - With 24/8 bit planes for accelerated 2D imaging - Hyper CRX-24 Graphics Adapter Board (P/O A4071B, 1 of 2 Boards in A4442A) |
| 438092-B21 | Quad-Core Intel Xeon E7320 Processor (2.13 GHz, 2x2M cache, 80 Watts) |
| 438092-L21 | HP DL580G5 2.13 2x2M QC E7320 kit, FIO |
| 438093-B21 | Quad-Core Intel Xeon E7310 Processor (1.6 GHz, 2x2M cache, 80 Watts) |
| 438093-L21 | HP DL580G5 1.6 2x2M QC E7310 kit, FIO |
| 438100-B21 | Quad-Core Intel Xeon L7345 Processor (1.86 GHz, 2x4M cache, 50 Watts) |
| 438100-L21 | HP DL580G5 1.86 2x4M QC 50W L7345 kit, FIO |
| 403724-B21 | x4-x8 PCI-Express Bus Expander Option |
| 403766-B21 | ML370 G5 Memory Board Kit |
| 438101-B21 | Dual-Core Intel Xeon E7220 Processor (2.93 GHz, 2x4M cache, 80 Watts) |
| 438101-L21 | Dual-Core HP DL580G5 2.93 2x4M 80W E7220 kit, FIO |
| 439235-001 | Fan, 120-mm, hot-plug |
| 440785-001 | Power supply, 1200 W |
| 441830-001 | Power supply, 1200 W |
| 448384-001 | Systems Insight Display |
| A4071A | Hyper CRX-24 graphics adapter board (24/8 bit planes) - For accelerated 2D imaging |
| A4071B | Hyper CRX-24 graphics adapter board - With 24/8 bit planes for accelerated 2D imaging |
| A4074A | Hyper CRX-48Z graphics adapter board - With 24/24 bit planes for accelerated 3D solids - (Replaced by A4074AR) |
| A4076A | 2GB/4GB Single-Ended SCSI-2 DDS-1 (DAT) tape drive |
| A4077A | Add-on color graphics board - With eight bit planes for 2D imaging |
| A4077AR | Add-on color graphics board - With eight bit planes for 2D imaging |
| A4078A | Dual color graphics board |
| A4078AR | Dual color graphics board |
| A4079B | Hyper CRX-8Z graphics adapter - With 8/8 double buffered image plane for accelerated 2D/3D wireframe |
| A4079BR | Hyper CRX-8Z graphics adapter - With 8/8 double buffered image plane for accelerated 2D/3D wireframe |
| A4081-00014 | Backplane support - Metal plate to support the backplane PCA |
| A4081-00030 | Drive mounting bracket - For mounting a 5.25-inch removable media drive in the front of the peripheral module assembly |
| A4081-00032 | Drive mounting bracket - For mounting a 3.5-inch hard disk drive in the rear of the peripheral module assembly |
| A4081-00041 | EMI clip |
| A4081-00045 | EMI clip |
| A4081-00067 | CPU processor guide |
| A4081-00068 | CPU processor cover |
| A4081-40001 | Outer left side panel |
