| Part | Description |
| A6840A | rp5470 (Carrier Grade) (A6840A) |
| 1005-0365 | Fiber-optic short wave multimode interface cable - 50um core, 125um cladding - SC connectors - 50m (164ft) long - (A3735A, A5646A, A5750A Option 002) |
| 1005-0366 | Fiber-optic short wave multimode interface cable - 50um core, 125um cladding - SC connectors - 100m (328ft) long - (A3736A, A5647A, A5750A Option 003) |
| A4926A | LAN adapter - 1000Base-SX PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
| A4929A | LAN adapter - 1000Base-T PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
| A4978-00039 | Cover thumbscrew - 6-32 thread - Holds the top cover on the chassis (two used) |
| A4978-62005 | Single Connector Attach (SCA) hard disk drive mounting bracket - Allows mounting of removable hard drives in the drive bay |
| A4978-62006 | CD-ROM drive mounting bracket |
| A4978-62012 | Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable - 12VDC nominal operating voltage - Mounts to the I/O card cage bracket |
| A4978-62025 | LCD display with power switch mounted in a plastic bracket - Has attached 1-inch ribbon cable with male DB-25 connector - Mounts to the front of the chassis assembly |
| A4978-86014 | Tubeaxial fan kit (Panaflo model FBA12G12H) - 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable - 12VDC nominal operating voltage - Includes ESD wrist strap and instructions - Mounts on the rear of the chassis assembly (Two used) |
| A4986-00026 | I/O card air divider (baffle) - Mounts in the upper rear of the chassis assembly (above the two rear panel fans) |
| A4986-00039 | Fan mounting bracket for 80mm hard disk / memory cooling fan |
| A4986-40005 | Fan/speaker bracket assembly - Has PC board guides on rear for the I/O boards |
| A4986-40007 | PCI board retainer clip - Keeps the PCI boards secure in the system board connector slots |
| A4986-60001 | New part for A4986-69001 |
| A4986-62003 | Front bezel assembly - Includes front bezel with molded in display bezel and power button, blank CD-ROM and floppy filler panels, and security lock |
| A4986-62006 | Floppy disk drive mounting bracket - Mounts below the CD-ROM drive |
| A4986-63002 | IDE CD-ROM drive ribbon cable with ferrite - 40-pin (F) connector marked 'to PCA' to a 40-pin (F) connector marked 'to CD-ROM' - 34cm (13.4in) long - From CD-ROM drive to system processor board |
| A4986-63003 | Ultra SCSI/Low Voltage Differential (LVD) SCSI cable - Has one 68-pin (M) connector on each end - 0.6m (2ft) long - From SCA hard drive backplane board to system processor board |
| A4986-63004 | Floppy drive ribbon cable with ferrite - 34-pin (F) connector marked 'to PCA' to 34-pin (F) connector marked 'to floppy' - 43.2cm (17in) long |
| A4986-63005 | Drive power cable - Two 4-pin (F) connectors with four wires and a 4-pin (F) connector with two wires - 85cm (33.5in) long - From CD-ROM and floppy drives to system processor board |
| A4986-63006 | Ribbon cable - DB-25 (M) connector to 20-pin (F) connector - 46cm (18in) long - From LCD display to system processor board |
| A4986-63008 | LVD (Low voltage differential)/single-ended SCSI terminator - Has integral status LED which displays single-ended or low voltage differential mode - 68 pin (M) with thumbscrews |
| A4986-69001 | Power supply assembly (500 watts) - Includes power supply, safety interlock switch, and AC power connector - Mounts in the lower left of the chassis assembly |
| A4986-86003 | SCA (Single connector attach) hard disk backplane PCA - Has one female 68-PIN connector, and two 80-PIN SCA hard drive connectors - Mounts to the rear of the hard drive bay |
| A4986-86006 | Chassis assembly - Includes: 2 rear fans, hard drive/memory fan, I/O card fan, I/O card guide with speaker, I/O card bracket, air divider, IDE, FDD, and SCSI LVD power and data cables, status panel with cable, drive trays, and the front bezel assembly |
| A4993A | 128MB, 120MHz SDRAM DIMM memory module |
| A4994A | 256MB, 120MHz SDRAM DIMM memory module |
| A4996A | 9.1GB Ultra2 wide SCSI LVD hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A4997A | 9.1GB Ultra2 wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A5001A | 32x-max CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector |
| A5009A | 1.44MB floppy drive - 3.5-inch form factor with IDE PC/AT interface |
| A5158A | 1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors |
| A5158AR | 1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors |
| A6057-60015 | New part for A6057-69015 |
| A6057-69015 | System processor board assembly - Includes one 750MHz PA-RISC 8700 processor with revision 2.3 chip set (Can run either HP-UX 11.0 or 11i) - Mounts in the right side of the chassis assembly |
| A7853A | IDE CD-RW drive - 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read |
| D4385-70001 | 48X CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector (Mitsumi) |
| J1457A | Rack mount kit - Includes the rack mount base, left and right rack ear panels, heavy duty slide rails, various screws, nuts, spacers, and an installation guide |
| J3526A | WAN adapter - Four port X.25 frame relay adapter card |
| 0950-4530 | Processor power supply (or module) - DC to DC converter module with power supply cable (12V DC in, 1.5V DC at 100A nominal output) - Mounts on the system processor board - Plugs into the base of one of the two processor assemblies |
| 0957-2092 | New part for AB601-69001 |
| 1420-0356 | 3.0V battery (20mm diameter, 3.2mm thick, 220 mA-hr) - Type CR2032 lithium - Mounts on the system processor board |
| A6873B | RX2600 Server and one 1.5 GHz/6 MB processor/one core |
| A6912A | rp8420 (A6912A) |
| A6961A | HP Integrity rx4640 Server - One way 1.3GHz (A6961A) |
| A7025A | HP 9000 Server rp7420 (A7025A) |
| A7111A | rp7405 2-way (A7111A) |
| A7112A | rp7405 4-way (A7112A) |
| A7113A | rp7405 8-way (A7113A) |
| A7136A | HP 9000 rp3410-2 server with one PA-8800 800 MHz CPU and 512 MB memory |
| 287476-001 | PCI interface card (with diode) - IEEE 1394 (FireWire), two ports - 400, 200, 100Mbps data rates - Provides two external 6-pin ports and one internal 10-pin port (to connect to the front panel) - Requires one 3.3V PCI slot - (Part of AB627A) |
| 313287-001 | ATI Fire GL X1 AGP 8X graphics card (FGL 9700 GPU based) - High-end 3D graphics board with 256MB DDR SGRAM memory, dual 400MHz/30-bit RAMDAC, and two DVI-I (F) analog/digital outputs - Requires one AGP and adjacent slot - (Part of A9653A) |
| 351385-001 | ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) - Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output - Requires one AGP slot - (Part of AA929A, AB638A) |
| 384069-001 | 16X DVD+R/RW half height optical drive |
| 384069-001N | New part for 384069-001 |
| 399415-001 | 16X DVD+R/RW half height optical drive |
| 8120-3997 | Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has 90 degree (F) receptacle (for 220V in Denmark) |
| 8120-6869 | Power cord (Flint Gray) - 3-wire, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Argentina) |
| 8120-6980 | Power cord (Flint Gray) - 18 AWG, 4.5m (14.8ft) long - Has straight (F) receptacle (for 220V in South America) |
| 8120-8706 | Power cord (Flint Gray) - 2.3m (7.5ft) long - Has EPSR symbol molded into the plug and straight (F) receptacle (for 220V in Hong Kong) |
| 8120-8740 | Internal CD-ROM audio cable - Has large 4 pin (F) connector on one end - Has large 4 pin (F) and small 4 pin (F) connector on the other end - 0.6m (2.0ft) long |
| A4983-65103 | USB 3-button mouse (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector |
| A6060-67005 | New part for A6060-69005 |
| A6060-69005 | 36GB Ultra320 Wide SCSI LVD hard drive (Seagate)- 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A6060B | 36GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A6828-60101 | Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - (Part of A6828A, A8686A, and A7059A) |
| A6828AR | Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A7214-69002 | 73GB Ultra320 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A7214B | 73GB Ultra320 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A7844-62005 | IDE DVD-ROM drive (Carbon Black) - 16X DVD-ROM read - (Part of AA8682B) |
| A7861-65101 | USB 3-button scrolling mouse (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector |
| A7861-65343 | USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (United States English) |
| A7861-65344 | USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (German) |
| A7861-65345 | USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Spanish) |
| A7861-65346 | USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (French) |
| A7861-65347 | USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Swiss) |
| A7861-65348 | USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (United Kingdom English) |
| A7861-65349 | USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Italian) |
| A7861-65350 | USB keyboard with PC-106 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Korean) |
| A7861-65351 | USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Simplified Chinese) |
| A7861-65352 | USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Traditional Chinese) |
| A7861-65353 | USB keyboard with JIS-109 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Japanese) |
| A7861-65354 | USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (International-English) |
| A8087-67002 | New part for A8087-69002 |
| A8087-69002 | 512MB SDRAM DIMM memory module - PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMM (one DIMM) - Memory must be installed in like pairs (one DIMM from pair in A8087B) |
| A8087B | 1.0GB SDRAM DIMM memory module Kit - Includes a pair of 512MB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs - Memory must be installed in like pairs |
| A8088-67002 | New part for A8088-69002 |
| A8088-69002 | 1.0GB SDRAM DIMM memory module - PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMM (one DIMM) - Memory must be installed in like pairs (one DIMM from pair in A8088B) |
| A8088B | 2.0GB SDRAM DIMM memory module Kit - Includes a pair of 1.0GB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs - Memory must be installed in like pairs |
| A7183D | B2600 base system with 500 MHz PA-RISC 8600 CPU, 512 MB RAM, dvd-rom, HP fx5 pro graphics, and 36 GB LVD SCSI 10K rpm disk |
| A8328A | rp5470 (A8328A) |
| A9636A | C3750 base system with 875 MHz PA-RISC 8700+ CPU, no memory |
| A9637A | C3750 base system with 875 MHz PA-RISC 8700+ CPU with 2 GB RAM |
| A9639A | J6750 base system with 2 x 875MHz PA-RISC 8700+ CPUs with 4 GB memory (A9639A) |
| A9640A | J6750 base system with 2 x 875MHz PA-RISC 8700+ CPUs with 4 GB memory (A9640A) |
| A9641A | J6750 base system with 2 x 875MHz PA-RISC 8700+ CPUs (A9641A) |
| A9833A | HP Integrity Superdome SX2000 Server |
| A8089-67001 | New part for A8089-69001 |
| A8089-69001 | 2.0B SDRAM DIMM memory module - PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMM (one DIMM) - Memory must be installed in like pairs (one DIMM from pair in A8089B) |
| A8089B | 4.0GB SDRAM DIMM memory module Kit - Includes a pair of 2.0GB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs - Memory must be installed in like pairs |
| A8682B | ATAPI IDE DVD-ROM drive - 16x-max DVD-ROM read, 40x-max CD-ROM read - Half height drive with Carbon Black faceplate |
| A8683B | ATAPI IDE CD-RW drive - 48X-max write, 12X-max rewrite, 48X-max read - Half height drive with Carbon Black faceplate |
| A9649-67001 | New part for A9649-69001 |
| A9649-69001 | 146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9649-69002 | 146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high - ORDER A9649-69001 |
| A9649A | 146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9653A | ATI Fire GL X1 AGP 8X graphics card (FGL 9700 GPU based) - High-end 3D graphics board with 256MB DDR SGRAM memory, dual 400MHz/30-bit RAMDAC, and two DVI-I (F) analog/digital display outputs - Requires one AGP and one adjacent slot |
| AB601-00016 | RFI shield (filler) - Metal filler panel for the empty drive slots on the optical drive bay - Mounts to the chassis assembly |
| AB601-00017 | Right side cosmetic cover (or panel) - Used to cover the right side in a tower configured system |
| AB601-40013 | Top cover (or panel) - Slightly curved plastic panel (Carbon Black) - Mounts on top of the computer in a tower configured system |
| AB601-40016 | Chassis foot - Plastic D-shaped foot that provides a hook for the pedestal - Mounts to the bottom of the chassis assembly (four used) |
| AB601-40026 | Namplate for the c8000 workstation (Carbon Black) - For use with a rack mount configured workstation - Mounts to the front panel bezel |
| AB601-60510 | New part for AB601-69520 |
| AB601-60515 | c8000 system board - Has integrated IDE and SCSI drive interfaces - Does NOT include the processors or power modules - RSTRD AB601-60510 |
| AB601-62003 | Control panel assembly - Includes the power switch, headphone and mic jacks, status LEDs, USB connectors, FireWire connector, connecting cables, intrusion switch and temperature sensor (on attached cable) - Mounts on the front of the chassis assembly |
| AB601-62006 | Drive mounting tray - Includes the two Blue plastic drive rails and spring steel retainer tray - For mounting a 3.5-inch hard drive in the hard drive bay |
| AB601-62008 | I/O card guide and fan holder - Front I/O card guide (Blue plastic) and housing for the cooling fan (for the hard drives and I/O boards) - Snap-locks on to the side of the hard drive bay |
| AB601-62010 | PC board tray assembly - Large metal tray that supports the system |
| AB601-62011 | Front panel bezel assembly (Carbon Black plastic) - has cut outs for the optical drive slots and control panel assembly - For a tower configured system |
| AB601-62012 | Chassis pedestal - Stabilization structure on the bottom of the computer in the tower configuration - Snap-locks onto the four plastic feet on the bottom of the chassis assembly |
| AB601-62013 | Front panel bezel assembly (Carbon Black plastic) - has cut outs for the optical drive slots and control panel assembly - For a rack mount configured system |
| AB601-62014 | AGP PC board retainer - Blue plastic block with Black PC board retainer finger - Snap-locks on the rear of the chassis assembly |
| AB601-62015 | Airflow guide (Blue plastic) - Provides proper air flow over the eight memory module slots - Does NOT include the fan assembly - Snap-locks in the center of the chassis above the system processor board |
| AB601-62024 | Optical drive cage - Metal structure that houses the three (maximum) optical drives - Mounts on the upper front of the chassis assembly |
| AB601-62026 | Processor assembly installation/removal tool - Used to loosen the four torx retaining screws and unlock the processor assembly from the system board |
| AB601-63004 | Cable assembly - Connects between the speaker and the optional PCI audio board |
| AB601-63005 | Cable assembly - Connects between the speaker and the optional PCI audio board |
| AB601-63006 | IDE CD-ROM/DVD drive data cable - Connects between two (first and second) CD-ROM/DVD drives and the system processor board secondary IDE connector |
| AB601-63007 | IDE CD-ROM/DVD drive or hard drive data cable - Connects between the third CD-ROM/DVD drive or two (maximum) hard drives and the system processor board primary IDE connector |
| AB601-63010 | Rear panel SCSI cable assembly (includes the rear panel SCSI connector) - Connects between the rear panel and the system board SCSI 'B' connector or optional PCI SCSI card |
| AB601-63011 | SCSI hard drive cable - Connects between the four (maximum) hard drives and the system processor board SCSI 'A' connector |
| AB601-67004 | Access cover (or panel) - Includes the large rectangular cover (Carbon Black) with HP logo, lock, and release latch - Mounts on the left side of the computer in a tower configured system |
| AB601-69001 | AC power supply assembly (700-watt), with active power factor correction (APFC) - 88V to 265V AC, 47Hz to 66Hz input - Mounts in the upper rear corner of the chassis |
| AB601-69520 | c8000 system board - Has integrated IDE and SCSI drive interfaces - Does NOT include the processors or power modules - Mounts in the right side of the computer |
| A9833AR | HP Integrity Superdome SX2000 Server |
| A9950A | HP 9000 rp4440 Server with 800 MHz PA-8900 dual processor module |
| A9951A | HP 9000 rp4440 Server with 1.0 GHz PA-8900 dual processor module |
| A9952A | HP 9000 rp3440-4 server with one 800MHz CPU, no memory included |
| A9953A | HP 9000 rp3440-4 server with one 1.0GHz CPU, no memory included |
| A9954A | HP 9000 rp3410-2 server with one PA-8900 800MHz CPU, no memory included |
| AB602A | HP Spaceball 5000 (Carbon Black) - Six degrees-of-freedom motion controller (axis), 12 buttons (three under the thumb and nine under the fingers), and 3.9m (12.8ft) cable with 9-pin D-subminiature serial connector |
| AB620-60502 | Audio sound card - Provides 16-bit stereo mic in, headphone out, line in, line out - Requires one PCI slot - For HP-UX operating system - (Part of AB620A) |
| AB620A | Audio board - 16 bit audio board with microphone in, stereo out, line in, and line out connectors - Requires one PCI slot |
| AB625A | Tower kit - For converting a rack mount system to a tower configuration - Includes top cover, front bezel, cosmetic right side cover, bottom feet, the pedestal, and installation instructions |
| AB626A | Rack mount kit - For converting a tower configured system to a rack mount system - Includes the front bezel, mounting rails, cable management arm, and installation instructions |
| AB627A | IEEE-1394 (FireWire) interface board (with diode) - 400, 200, 100Mbps data rates - Provides two external 6-pin ports and one internal 10-pin port (to connect to the front panel) - Requires one 3.3V PCI slot |
| AB628-62001 | 73GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| AB628-69001 | 73GB Ultra320 Wide SCSI LVD hard drive (Segate or Fujitsu) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| AB628A | 73GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| AB630A | 900 MHz dual core PA-8800 PA-RISC processor with 1.5 MB L1 cache and 32 MB L2 cache |
| AB631A | 1 GHz dual core PA-8800 PA-RISC processor with 1.5 MB L1 cache and 32 MB L2 cache |
| AB636A | 900MHz PA-8800 processor upgrade - For adding a second processor module to the computer - Includes 2-way processor with 1.5MB L1 cache and 32MB L2 cache, power supply module, and instructions - Note: Processor speeds cannot be mixed within a system |
| AB637A | 1.0GHz PA-8800 processor upgrade - For adding a second processor module to the computer - Includes 2-way processor with 1.5MB L1 cache and 32MB L2 cache, power supply module, and instructions - Note: Processor speeds cannot be mixed within a system |
| AB638-60001 | ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) - Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output - Requires one AGP slot |
| AB638A | ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) - Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output - Requires one AGP slot |
| AB642A | External SCSI connector kit - To add an external Ultra320 SCSI port on the rear of the computer - Can be connected to the integrated SCSI bus on the system board or to an optional PCI SCSI card - Includes cable, hardware and instructions |
| AB665A | 900 MHz dual core PA-8800 PA-RISC processor with 1.5 MB L1 cache and no L2 cache |
| AE314-67101 | New part for AE314-69101 |
| AE314-69101 | 73GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| AE315-67101 | New part for AE315-69101 |
| AE315-69101 | 146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high - ORDER A9649-69001 |
| AE318-67101 | New part for AE318-69101 |
| AE318-69101 | 73GB Ultra320 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| 0950-3694 | New part for A1658-69032 |
| 0950-4051 | AC power supply assembly (320W) with fan - 88V to 269V AC, 47Hz to 66Hz input - Mounts in the rear right corner of the chassis |
| 0950-4052 | DC power supply assembly (320W) with fan - 36V to 72V DC input - Mounts in the rear right corner of the chassis |
| 290992-M30 | New part for 308563-001 |
| 308563-001 | ATAPI IDE DVD-ROM drive - 16x-max DVD-ROM read, 40x-max CD-ROM read - Half height drive with Carbon Black faceplate |
| 5065-5711 | ORDER 5185-1581 |
| 5183-9500 | Headphones - With 3m (10ft) straight cable with 3.5mm stereo phone plug, and built-in volume control and stereo/mono mode switch |
| 5185-1581 | Sound card - Floyd LC, PC99, CLRS, 128V 1373 - (Part of A6077A) |
| A1658-69032 | 36.4GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) |
| A4992B | RS232-C Spaceball 4000 3D Motion Controller (Light Gray with Black ball and palm insert) - Includes twelve user buttons (nine on the finger side and three on the thumb side) and a controller ball - Has 3.0m (10ft) cable with 9-pin 'D' connector |
| A6070-04007 | Top cover assembly (Gray) - 42cm (16.7in) wide by 43cm (16.8in) long solid metal cover with DIMM retainer - For the top of the chassis assembly on computers with a DC power supply |
| A6070-04008 | Top cover assembly (Gray) - 42cm (16.7in) wide by 43cm (16.8in) long solid metal cover with DIMM retainer - Has slots in top cover for adding plastic desktop cover - For use with computers using an AC power supply |
| A6070-40007 | Trim Strip - Small blue plastic trim strip that mounts on the bottom of |
| A6070-62001 | Chassis assembly - Includes the chassis, the large (92mm) fan and bracket assembly, the small (60mm) fan and bracket assembly, the PCI card cage and retainer, CD-ROM drive tray, and hard drive tray (Does NOT include any PC boards or top cover) |
| A6070-62003 | CD-ROM drive mounting tray (bracket) - Front drive bay cage for mounting a CD-ROM drive |
| A9955A | HP 9000 1-core rp4410 Server with 800 MHz PA-8900 processor module |
| A9956A | HP 9000 1-core rp4410 Server with 1.0 GHz PA-8900 processor module |
| A9958A | HP 9000 rp8440 SMP Base System (does not include cell boards, I/O Backplane, memory, storage, or CPUs) |
| AB297AR | HP Integrity rx8640 Server |
| AB301A | HP Integrity rx8640 Sys Expansion Unit |
| AB312AR | HP Integrity rx7640 Server |
| A6070-62004 | PCI card cage and board retainer assembly (Does NOT include the PCI backplane PC board) - Mounts in the left side of the chassis behind the drive bay |
| A6070-62006 | Front Bezel (full) - With molded-in air louvers and cutout for removable media drive (For use with computers with an AC power supply) |
| A6070-62007 | ORDER A6070-04008 |
| A6070-62008 | Hard drive mounting tray (bracket) with removal handle - Mounts in the bottom front left in the chassis |
| A6070-62009 | LCD display and bracket assembly - Mounts to the front of the chassis assembly |
| A6070-62028 | Top cover assembly (Gray) - 42cm (16.7in) wide by 43cm (16.8in) long solid metal cover with DIMM retainer - For the top of the chassis assembly on computers with a DC power supply |