| Part | Description |
| A5506B | 100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system |
| A5513A | 155Mb/s ATM PCI LAN adapter with MMF connectors |
| A5783A | Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board |
| A5838A | Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter - Has two RJ-45 LAN ports and two external 68-pin very high density connectors |
| A6386A | HyperFabric2 PCI 4X fiber adapter interface and switch - For HP-UX operating system |
| A6746-69001 | 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6748A | HP 8-port MUX PCI Multiplexer interface board - Speeds up to 230,400 bps per port, 33MHz bus speed - Occupies one PCI slot - For HP-UX operating system |
| A6749A | HP 64-port MUX PCI Multiplexer interface board |
| A6795A | 2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6795AR | 2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6825-67101 | 1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one 64-bit PCI slot - (Part of A6825A, A8685A, and A7061A) |
| A6825A | 1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A6826A | 2Gbps Fiber Channel host bus adapter - For 64-bit Linux and HP-UX - Dual channel, short wave, 64-bit, 133MHz PCI-X - Has LC connectors |
| A6828A | Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6829-60101 | Dual channel Ultra160 LVD SCSI adapter board - Supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - Requires one 64-bit PCI slot - (Part of A6829A, A8686A, and A7060A) |
| A6829A | Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6833-69001 | 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6834-60001 | New part for A6834-69001 |
| A6834-69001 | 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6835-69001 | 2.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6835A | 8.0GB DDR-SDRAM memory upgrade kit - Includes four 2.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A6847-67101 | 1000 Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one PCI slot |
| A6847A | 1000Base-SX Gigabit Ethernet adapter card for HP-UX |
| A6961-04028 | Power supply hot-swap fan assembly - Includes two fans mounted in a metal frame - Smaller of the two fan sizes found in the chassis |
| A6961-04055 | I/O section hot-swap fan assembly - Includes two fans mounted in a metal frame - Larger of the two fan sizes found in the chassis |
| A6961-40034 | DIMM slot filler - Covers unused DIMM slots to aid in cooling - One DIMM filler covers two adjacent DIMM slots |
| A6961-63002 | Display board (status panel) cable |
| A6961-63003 | Power distribution board to midplane board cable - Has 10-pin connectors at each end |
| A6961-63004 | Power distribution board to midplane board ribbon cable |
| A6961-63005 | QuickFind diagnostic board to midplane board cable |
| A6961-63006 | Internal SCSI cable |
| A6961-63008 | SCSI backplane board to midplane board cable |
| A6961-63011 | SCSI controler jumper cable (simplex only) |
| A6961-63014 | Power distribution board to midplane board cable - Has 10-pin connectors at each end |
| A6961-63016 | QuickFind diagnostic board to midplane board cable |
| A6961-67005 | Midplane riser board - Has slots for the processor board, memory board, and I/O base board |
| A6961-67007 | New part for A6961-69007 |
| A6961-67008 | Front display/status panel - Has the power button and three status LEDs |
| A6961-67009 | QuickFind diagnostic board - Includes the plastic cover and label - Located underneath the top cover on top of the power supply cage |
| A6961-67015 | Power distrubution board - Has connectors for two hot-swap power supplies - Attached to the rear power supply cage underneath the hot-swap power supply fan unit |
| A6961-67016 | Hot-swap redundant power supply |
| A6961-67020 | I/O board divider - Provides short circuit protection to the hot-plug PCI accessory boards - Includes doorbell and latch |
| A6961-67021 | PCI retention clip |
| A6961-67022 | Front bezel for rack mount configuration |
| A6961-67024 | SCSI backplane board - Has two 80-pin SCA hot-swap drive sockets - Includes the management board and simplex board - Mounts at the back of the hot-swap drive cage |
| A7130A | 4 GB PC2100 DDR-SDRAM memory quad (4 x 1GB DIMMs) |
| AB297A | HP Integrity rx8640 Server - Base Chassis with 1 core I/O and 2 power supplies |
| AB443A | HP Integrity rx8640 Server Flexible Advantage STarter (FAST) with 8-processor cores |
| AB452A | Dual-core Intel® Itanium® 2 processor 1.6 GHz with 24 MB (1 Processor / 2 Cores) |
| AB548A | Intel® Itanium® 2 processor 1.6GHz with 6M L3 cache (Pack of 2 cpus) |
| AB584A | Dual-core Intel® Itanium® 2 processor 1.6 GHz with 18 MB (1 Processor / 2 Cores) |
| AD110A | PA-8900 dual-core processor module (1 Processor/ 2 cores) - 1.068 GHz |
| 0950-4417 | Voltage Regulator Module (VRM) 12.0VDC |
| 0950-4418 | Voltage Regulator Module (VRM) 5.0VDC |
| 0950-4419 | Voltage Regulator Module (VRM) 3.3VDC |
| 1420-0386 | 3.0V battery - 250mAh, lithium coin cell battery - Type CR2330 or equivalent - Not rechargeable |
| 212528-001 | Digital video cable - 19-pin DVI-D (M) to 19-pin DVI-D (M) |
| 30-10119-01 | ATI RADEON 7500 graphics controller - 64MB DDR SDRAM memory, 350MHz RAMDAC |
| 30-10119-02 | 2D PCI graphics card |
| 302268-003 | HP P930 19-inch monitor (North America and Japan) |
| 302270-003 | HP P1130 21-inch CRT monitor (Silver) (North America and Japan) |
| 302349-001 | Replacement HP P1130 21-inch color monitor - Has two 15-pin VGA connectors (For use in Europe and China) |
| 303102-003 | L2025 20-inch LCD flat panel display (Americas) |
| 303486-003 | HP L1825 18-inch flat panel display (North America and Japan) |
| 305538-021 | P930 series 19in performance monitor (Carbon Black bucket with silver bezel) - For the northern hemisphere - Flat screen, 18in viewable area, 0.24mm pitch, 1600 x 1200 @ 85Hz max resolution - Has attached 1.8m (5.9ft) cable with 15-pin 'D' connector |
| 305717-001 | VGA video cable - 1.8m long |
| 307132-001 | 3.6V battery pack assembly - 500mAH nickel metal hydride (NiMH) - Battery is oval shaped, 12.5mm (0.5in) high, 38mm (1.5in) wide, and 77mm (3.0in) long |
| 308684-B24 | HP L1825 18-inch flat panel TFT display (HP color scheme) - Has one analog (15-pin VGA) and one digital DVI-D input (For use in Europe and Asia Pacific) |
| 309101-B24 | HP L2025 20-inch flat panel TFT display (HP color scheme) - Has one analog (15-pin VGA) and one digital DVI-D input (For use in Europe and Asia) |
| 309520-001 | Smart Array 6402 and Smart Array 6404 Ultra320 SCSI controller - 64-bit, 133MHz PCI-X interface, RAID XOR engine - Two internal or two external Ultra320 SCSI channels - Does not include cache memory module or dual channel daughter board - (273915-B21) |
| 309521-001 | 128MB DDR memory with battery backed write cache - For Smart Array 6402 controller |
| 337988-001 | L2035 monitor, TCO-03, 20-inch active-matrix, TFT, native resolution of 1,600 x 1,200 pixels at 60 Hz |
| 345707-001 | P1230 22-inch (55.9-centimeter) color monitor, TCO '03 (Carbon Black bucket with Silver display bezel) - Has two 15-pin D-subminiature connectors to support multiple computers - For Europe and the Northern Hemisphere |
| 382925-031 | Easy Access PS/2 keyboard assembly (Carbon Black with Silver key bezel) - Has eight top row shortcut keys and attached 1.8m (6.0ft) long cable with 6-pin mini-DIN connector (United Kingdom) |
| 382925-041 | Easy Access PS/2 keyboard assembly (Carbon Black with Silver key bezel) - Has eight top row shortcut keys and attached 1.8m (6.0ft) long cable with 6-pin mini-DIN connector (Germany) |
| 382925-051 | Easy Access PS/2 keyboard assembly (Carbon Black with Silver key bezel) - Has eight top row shortcut keys and attached 1.8m (6.0ft) long cable with 6-pin mini-DIN connector (France) |
| 382925-061 | Easy Access PS/2 keyboard assembly (Carbon Black with Silver key bezel) - Has eight top row shortcut keys and attached 1.8m (6.0ft) long cable with 6-pin mini-DIN connector (Italy) |
| 382925-071 | Easy Access PS/2 keyboard assembly (Carbon Black with Silver key bezel) - Has eight top row shortcut keys and attached 1.8m (6.0ft) long cable with 6-pin mini-DIN connector (Spain) |
| 382925-331 | Easy Access PS/2 keyboard assembly (Carbon Black with Silver key bezel) - Has eight top row shortcut keys and attached 1.8m (6.0ft) long cable with 6-pin mini-DIN connector(Holland) |
| 391918-001 | HP IB Host Channel Adapter (HCA) 4X SDR PCI-X dual port module card |
| 418060-001 | HP IB Host Channel Adapter (HCA) 4X SDR PCI-X dual port module card |
| 8120-0668 | Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V/240V in South America) |
| 8120-0698 | Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
| 8120-1351 | Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 | Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1689 | Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-5341 | Power cord (Black) - 17 AWG, 2.5m (8.2ft) long - Has straight (F) C15 receptacle with a 'U' shaped channel above the ground pin to prevent use of a lower rated power cord (For 240VAC in South Africa and India) |
| 8120-6514 | Daisy chain power cord (Jade Gray) - 18 AWG, 2.0m (6.6ft) long - Has (M) C14 plug for power input, and (F) C13 plug for power output |
| 8120-6814 | Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark) |
| 8120-8376 | Power cord (Flint Gray) - 17 AWG, 2.2m (7.3ft) long - Has straight (F) receptacle (for 220V in China) |
| A3739B | Dual fiber distributed data interface (FDDI) adapter - Has a dual-attach connection to a FDDI - With two SC duplex-style keyed connectors |
| A5137AZ | Modular power distribution unit (part of the master rack) - 16A (amps), 100/240VAC, six C13 and two C19 outlets, mounts directly to the rack columns (separate installation kit is not required) |
| A5230A | 100Base-TX PCI LAN adapter with one RJ-45 port |
| AD149A | 300 GB HotPlug Ultra 320 SCSI low profile disk (10 K) |
| AD238A | 1.6GHz/24MB dual-core processor module |
| AD246A | HP Integrity rx2660 PCI-x 3 slot cage option |
| AD275A | 4 GB Chip Spare DDR2 memory pair (2 x 2 GB DIMMs) |
| AD351A | HP 1port rNIC 1000-Base-T Adapter (NC370T) PCI-X |
| 010963-001 | DL380 Power Switch Board |
| 012311-001 | Riser Cage for DL380 |
| 168003-9D1 | 8x Slimline DVD Drive |
| 219048-001 | Powerswitch and Cable for DL380 |
| 237079-001 | HP BL 20P PWR SUPPLY 3U |
| 243584-B22 | HP Blade Enclosure |
| A6961-67105 | Midplane riser board - Has slots for the processor board, memory board, and I/O base board |
| A6961-67106 | SCSI duplex board |
| A6961-67109 | QuickFind diagnostic board - Includes the plastic cover and label |
| A6961-67113 | DVD-ROM drive I/O board - Has slimline DVD-ROM drive connector and cable connector for DVD I/O board to midplane board cable |
| A6961-67115 | Power distrubution board - Has connectors for two hot-swap power supplies |
| A6961-67125 | Power supply - 700W, 48V |
| A6961-67204 | Memory board (16-slot) |
| A6961-67205 | SCSI backplane board - Has two 80-pin SCA hot-swap drive sockets - Includes the management board and simplex board |
| A6961-67206 | SCSI duplex board |
| A6961-67207 | New part for A6961-69207 |
| A6961-67213 | DVD-ROM drive I/O board - Has slimline DVD-ROM drive connector and cable connector for DVD I/O board to midplane board cable |
| A6961-67411 | I/O baseboard - Has eight 64-bit PCI slots - Includes VRMs |
| A6961-67804 | New part for A6961-69804 |
| A6961-69007 | Processor extender board - Has two processor sockets on one side and two on the other side - Plugs into the midplane board |
| A6961-69201 | I/O baseboard - Has eight 64-bit PCI slots - Includes VRMs |
| A6961-69204 | Memory board (16-slot) - Plugs into the midplane board |
| A6961-69207 | Processor extender board - Has two processor sockets on one side and two on the other side |
| A6961-69401 | I/O baseboard - Has eight 64-bit PCI slots - Includes VRMs |
| A6961-69411 | I/O baseboard - Has eight 64-bit PCI slots - Includes VRMs |
| A6961-69804 | Memory board (16-slot) |
| A6967A | 1GB PC2100 DDR-SDRAM memory quad (4x256MB DIMMs) |
| A6967AX | 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6968A | 2GB PC2100 DDR-SDRAM memory quad (4x512MB DIMMs) |
| A6968AX | 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6969-69001 | 1.0GB, 266MHz, PC2100, ECC DDR-SDRAM DIMM memory module |
| A6969A | 4.0GB DDR-SDRAM memory upgrade kit - Includes four 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A6969AX | 1.0GB, 266MHz, PC2100, ECC DDR-SDRAM DIMM memory module |
| A6970A | 8.0GB DDR-SDRAM memory upgrade kit - Includes four 2.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A6970AX | New part for A6835-69001 |
| A6976A | Hot-swap redundant power supply |
| A6977-67001 | Right rack mount bracket |
| A6977-67002 | Left rack mount bracket |
| A6977A | Field rack kit with side-mount slides and cable management arm |
| A6979-04001 | Pedestal kit - Includes parts required to change from the rack mount configuration to deskside pedestal |
| A6979A | Rack-less, standalone frame (Note: rx4640 is not intended for an office environment) |
| A7007-04001 | Slimline DVD-ROM/CD-RW combination drive |
| A7007A | Slimline DVD-ROM/CD-RW combination drive |
| A7011A | PCI-X Dual Port Gigabit Ethernet SX adapter card for HP-UX |
| A7012-67001 | 1000Base-T Gigabit PCI-X Ethernet network interface adapter board - Has two RJ-45 network ports, requires one 64-bit PCI-X slot - For HP-UX operating system |
| A7012A | PCI-X Dual Port Gigabit Ethernet TX adapter card for HP-UX |
| A7059A | Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For Windows or Linux operating systems |
| A7060A | Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For Windows and Linux operating systems |
| A7061A | 1000 Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one PCI slot - For Windows and Linux operating systems |
| A7073A | 1000Base-SX Gigabit Ethernet adapter card for Linux and Windows |
| A7158-69101 | Intel Itanium 2 processor - 1.5GHz (McKinley, 400MHz front side bus, 6.0MB Level-3 cache) |
| A7158A | Intel Itanium 2 processor upgrade - Includes one 1.5GHz (400MHz front side bus, 6.0MB cache) processor |
| A7158AX | New part for A7158-69101 |
| A7159-69101 | Intel Itanium 2 processor - 1.3GHz (McKinley, 400MHz front side bus, 3.0MB Level-3 cache) |
| A7159A | Intel Itanium 2 processor upgrade - Includes one 1.3GHz (400MHz front side bus, 3.0MB cache) processor |
| A7159AX | New part for A7159-69101 |
| A7163-04001 | Slimline DVD-ROM drive |
| A7163A | Slimline DVD-ROM drive |
| A7163B | Read-only DVD drive |
| A7173A | Dual channel Ultra320 SCSI adapter |
| 449414-001 | System board, ProLiant DL580 G5 Server |
| 449416-001 | Memory expansion board |
| 217053-B21 | DVD ROM Drive 16x |
| 290563-B21 | HP NC7771 PCI-X 1000T Gigabit Server Adapter |
| 346914-B21 | 128MB Battery-Backed Write Cache with Battery Housing |
| 348114-B21 | 910W (low line), 1300W (high line) Hot Plug Redundant Power Supply |
| 449417-001 | SPI board |
| 449418-001 | Systems Insight Display |
| 449419-001 | Power backplane, ProLiant DL580 G5 server |
| 449420-001 | SAS backplane |
| 449421-001 | PCI-X 3 Slot Option Card |
| A7217-60001 | New part for A7217-69001 |
| A7217-69001 | Replacement 24-inch color monitor with 22.5-inch viewable image (P/O A7217A) - Has 1920x1200 max resolution @ 75Hz and 0.24mm dot pitch - Includes HD-15 and five BNC video inputs - For the northern hemisphere |
| A7298A | StorageWorks 2 Gbps Fiber Channel Interface - 64-bit PCI or PCI-X bus PC board using shortwave Multimode cable with LC connector |
| A7782-63001 | USB to two-port PS/2 adapter - For converting one or two legacy or contemporary PS/2 devices to USB - For USB only systems running HP-UX 10.20 or later - One type 'A' Male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable - (A7782A) |
| A7782A | USB to 2-port PS/2 adapter - For converting one or two PS/2 devices to USB - For USB only systems running HP-UX 10.20 or later - One type 'A' male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable |
| A7836-69001 | 36GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A7838-64001 | New part for A7838-69001 |
| A7838-69001 | 73GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A7861C | USB keyboard and mouse |
| A9730-69001 | HP mx2 dual-core processor module - 1.1GHz |
| A9730-69101 | HP mx2 dual-core processor module - 1.1GHz |
| A9730A | HP mx2 Dual-processor module containing two Intel® Itanium® 2 processors |
| A9731-67003 | Intel Itanium 2 processor - 1.5GHz (McKinley, 400MHz front side bus, 4.0MB Level-3 cache) |
| A9731-69003 | Intel Itanium 2 processor - 1.5GHz (McKinley, 400MHz front side bus, 4.0MB level-3 cache) |
| A9731A | 1.5GHz/4MB Intel Itanium 2 processor |
| A9732-67003 | Intel Itanium 2 processor - 1.6GHz (McKinley, 400MHz front side bus, 6.0MB level-3 cache) |
| A9732-69003 | Intel Itanium 2 processor - 1.6GHz (McKinley, 400MHz front side bus, 6.0MB level-3 cache) |
| A9732A | 1.6GHz/6MB Intel Itanium 2 processor |
| A9733A | 1.6GHz/9MB Intel Itanium 2 processor |
| A9738B | 16-DIMM memory carrier board - Supports up to four quads of memory |
| A9739-67007 | New part for A9739-69007 |
| A9739-67008 | Memory board PCA (32-slot) - For firmware versions greater than 1.13 |
| A9739-69007 | Memory board PCA (32-slot) - For firmware versions greater than 1.13 |
