| Electrical |
| Electrical Element Requirement |
Voltage 100 VAC to 240 VAC (nominal) |
| Frequency |
47 - 63 Hz |
| Max. Operating current |
5.0 amps |
| Max. Surge current |
22 amp peaks |
| NOTE: For the DC power requirements, refer to the Netra st A1000 and Netra st D1000 Product Note. |
| Environment |
| Temperature (dry bulb) |
Operating 0ºC to 40ºC (32ºF to 104ºF) |
| Storage |
-25ºC to 65ºC (-13ºF to 149ºF) |
| Transit |
-25ºC to 65ºC (-13ºF to 149ºF) |
| Short term Operating |
-5ºC to 55ºC (23ºF to 131ºF) |
| Non-operating |
-40ºC to 70ºC (-40ºF to 158ºF) |
| Operating |
3.3ºC per 1000m (1.7ºF per 1000 ft.) above sea level |
| Altitude (based on drives) |
Operating: 0m to 3000m (0 ft to 10,000 ft) above sea level
Storage: 0m to 12,000m (0 ft to 40,000 ft) above sea level
Transit: 0m to 12,000m (0 ft to 40,000 ft) above sea level
|
| Heat Dissipation (maximum) |
260 Watts, 1092 BTU per hour |
| Sound Power |
6.6 B, in accordance with ISO 9296 |
| Earthquake |
NEBS requirements for earthquake zone 4 |
| NOTE: If you plan to operate the controller module at
altitudes between 1000m and 3000m (3280 ft and 9850 ft), you must lower the environmental temperature 3.3C (1.7F) for every 1000m (3280 ft) above sea level. |
| Regulations |
| Safety |
UL 1950, CSA C22.2-No.950, TUV EN 60950 |
| Emission |
FCC Part 15B, Class A, CISPR 22 Class A, VCCIClass 2 |
| Immunity |
EMC Directive (89/336/EEC), EN500821-1 |
| Harmonics |
MC Directive (89/336/EEC), EN60522-2 |
| Telcordia NEBS |
GR-1089-CORE*, GR-63-CORE,SR-3580, also TR-NWT-000295, TR-NWT-000078, TR-NWT-000357, TR-NWT-001217, TR-NWT-000930, TR-NWT-000332 ETSI compliance ETS 300-019-2-3, ETS 300-019-2-1, ETS300-019-2-2 |
| ETSI compliance |
ETS 300-019-2-3, ETS 300-019-2-1, ETS300-019-2-2 |
| *NOTE: All tests comply with exception of ESD Open
Door Immunity for NEBS 3. Netra st A1000 and Netra st D1000 are NEBS 2 Certified |
| Dimensions and Weight |
| Height |
17.5 cm (7.0 in) |
| Width |
44.94 cm (17.6 in) |
| Depth |
53.25 cm (21.0 in) |
| Weight |
Netra st A1000: Without disk drives 24.1 kg (53 lbs), Fully loaded 33.2 kg (73 lbs)
Netra st D1000: Without disk drives 23.4 kg (51.5 lbs), Fully loaded 32.3 kg (71 lbs) |
| NOTE: The unit total weight depends on the number of components installed in the chassis. |
Built on the successful Sun StorEdge[tm] A1000 and D1000, the Netra st A1000 and Netra st D1000 are 19"-rack-mount ready and come with either redundant -48V/-60V DC power or redundant AC power. The base model of the Netra st A1000 supports 4x18.2 GB disk drives and support up to 4x36.4 GB drives; the A1000 includes a hardware RAID controller with non-volatile data cache starting at 24MB, and can be upgraded up to 48MB. The base model of Netra st D1000 comes with 4x18.2GB and 4x36.4GB disk drives in High Performance JBOD mode (Just a Bunch of Disks) and supports up to 12x18.2 GB or 12x36.4 GB disk drives. Software RAID may be run with this JBOD array.
